7 Comprehensive toxicological study over 160 processing factors of pesticides in selected fruit and vegetables after water, mechanical and thermal processing treatments and their application to human health risk assessment.

8 Silver-loaded nanoparticles affect ex-vivo mechanical behavior and mineralization of dentin.

9 Graphene Oxide/Silver Nanoparticle Coating Produced by Electrophoretic Deposition Improved the Mechanical and Tribological Properties of NiTi Alloy for Biomedical Applications

10 The effects of nano-sized carbon fillers on the physico-chemical, mechanical, and biological properties of polyester nanocomposites

11 Effect of the incorporation of chitosan on the physico-chemical, mechanical properties and biological activity on a mixture of polycaprolactone and polyurethanes obtained from castor oil

12 Bioactive starch nanocomposite films with antioxidant activity and enhanced mechanical properties obtained by extrusion followed by thermo-compression

13 Ultraviolet to Mid-Infrared Emissivity Control by Mechanically Reconfigurable Graphene.

14 Ultraviolet to Mid-Infrared Emissivity Control by Mechanically Reconfigurable Graphene.

15 Functional endoluminal paving (FELP): Thermoforming, biodegradation, and mechanical properties of a novel polymer graft for abdominal aortic aneurysms

16 The effects of chemical reaction on the microstructure and mechanical properties of polyacrylonitrile (PAN) precursor fibers

17 Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler

18 Improvement of the mechanical and thermal properties of polyester nonwoven fabrics by PTFE coating

19 Comparative study on physicochemical and mechanical characterization of new nanocarbon-based hydroxyapatite nanocomposites

20 INVESTIGATION OF MECHANICAL PROPERTIES OF POLYESTER FIBER, ACRYLIC FIBER AND POLYAMIDE FIBER REINFORCED COMPOSITES

21 Use of Radial Basis Function Neural Network in Estimating Wood Composite Materials According to Mechanical and Physical Properties

22 Mg/Zn COMPOSITES PRODUCED BY MECHANICAL ALLOYING AND HOT PRESSING AND IN-VITRO BIODEGRADATION

23 Effect of fullerene (C60) nanoparticle on mechanical properties of hot-extruded aluminum matrix composite

24 INVESTIGATION OF MECHANICAL PROPERTIES OF POLYESTER FIBER, ACRYLIC FIBER AND POLYAMIDE FIBER REINFORCED COMPOSITES

25 Use of Radial Basis Function Neural Network in Estimating Wood Composite Materials According to Mechanical and Physical Properties

26 INVESTIGATION OF MECHANICAL PROPERTIES OF POLYESTER FIBER, ACRYLIC FIBER AND POLYAMIDE FIBER REINFORCED COMPOSITES

27 Use of Radial Basis Function Neural Network in Estimating Wood Composite Materials According to Mechanical and Physical Properties

28 An Analysis of the Mechanical Properties of the Ponseti Method in Clubfoot Treatment

29 Improving the mechanical and thermal properties of chlorinated poly(vinyl chloride) by incorporating modified CaCO3 nanoparticles as a filler

30 Improvement of the mechanical and thermal properties of polyester nonwoven fabrics by PTFE coating

31 Comparative study on physicochemical and mechanical characterization of new nanocarbon-based hydroxyapatite nanocomposites

32 Mg/Zn COMPOSITES PRODUCED BY MECHANICAL ALLOYING AND HOT PRESSING AND IN-VITRO BIODEGRADATION

33 Effect of fullerene (C60) nanoparticle on mechanical properties of hot-extruded aluminum matrix composite

34 High-Performance and Rapid-Response Electrical Heaters Based on Ultraflexible, Heat-Resistant, and Mechanically Strong Aramid Nanofiber/Ag Nanowire Nanocomposite Papers.

35 Effect of nanoparticle size on the mechanical properties of nanoparticle assemblies.

36 Development of q-L-EIV interactive curves for comparison of the environmental performance of composite slabs and RC slabs from the perspective of mechanical features.

37 Cardiac mechanical energy and effects on the arterial tree.

38 Sustainable Materials with Enhanced Mechanical Properties Based on Industrial Polyhydroxyalkanoates Reinforced with Organomodified Sepiolite and Montmorillonite

39 Revelation of enzyme activity of mutant pyrazinamidases from Mycobacterium tuberculosis upon binding with various metals using quantum mechanical approach.

40 Influence of Strengthening Material Behavior and Geometry Parameters on Mechanical Behavior of Biaxial Cruciform Specimen for Envelope Material.

41 Evaluation of Static and Dynamic Residual Mechanical Properties of Heat-Damaged Concrete for Nuclear Reactor Auxiliary Buildings in Korea Using Elastic Wave Velocity Measurements.

42 Prediction Model for Mechanical Properties of Lightweight Aggregate Concrete Using Artificial Neural Network.

43 Transport mechanism of deformable micro-gel particle through micropores with mechanical properties characterized by AFM

44 Effect of two organic chemical fluids on the mechanical properties of an expansive clay soil

45 Chemical state, structure and mechanical properties of multi-element (CrTaNbMoV)Nx films by reactive magnetron sputtering

46 The Construction of Undergraduate Pathway Curriculum System in Higher Vocational Education in Mechanical Engineering

47 Game-based learning in mechanical engineering education: Case study of games-based learning application in computer aided design assembly

48 CB2 receptor deletion on myeloid cells enhanced mechanical allodynia in a mouse model of neuropathic pain

49 Evaluation of the mechanical properties of laser cladded hypereutectoid steel rails

50 Effect of cooling rate on microstructure and mechanical properties in the CGHAZ of electroslag welded pearlitic rail steel

51 Effect of Ce on mechanical properties and corrosion resistance of CL50D high speed rail wheel steel

52 Effects of Quenching Temperature and Cooling Rate on the Microstructure and Mechanical Properties of U75V Rail Steel

53 Microstructural and Mechanical Properties Examination of High-Power Diode Laser-Treated R260 Grade Rail Steels Under Different Processing Temperatures

54 Cartography of the mechanical properties of the human amniotic membrane.

55 Plant-derived Nanocellulose as Structural and Mechanical Reinforcement of Freeze-Cast Chitosan Scaffolds for Biomedical Applications.

56 Erratum: Computer simulations suggest that prostate enlargement due to benign prostatic hyperplasia mechanically impedes prostate cancer growth (Proceedings of the National Academy of Sciences of the United States of America (2019) 116 (1152–1161) DOI: 10.1073/pnas.1815735116)

57 Effects of Tear Film Instability on Sensory Responses to Corneal Cold, Mechanical, and Chemical Stimuli.

58 Separation mechanism of polyvinyl chloride and copper components from swollen electric cables by mechanical agitation.

59 The effects of domestic mechanical knee joints on pelvic motion in transfemoral amputees.

60 Biological Reclaiming of Recycled Rubber and Its Effect on Mechanical Properties of New Rubber Vulcanizates

61 Effect of interphase, curvature and agglomeration of SWCNTs on mechanical properties of polymer-based nanocomposites: Experimental and numerical investigations

62 Influence of seawater aging on mechanical properties of nano-Al2O3 embedded glass fiber reinforced polymer nanocomposites

63 Enhanced thermal and mechanical properties of epoxy composites by mixing thermotropic liquid crystalline epoxy grafted graphene oxide

64 Incorporation of Carbon Nanofillers Tunes Mechanical and Electrical Percolation in PHBV:PLA Blends

65 A mechanical acupuncture instrument mitigates the endoplasmic reticulum stress and oxidative stress of ovariectomized rats.

66 Tunable Mechanical, Electrical, and Thermal Properties of Polymer Nanocomposites through GMA Bridging at Interface.

67 Normative technical documentation of association of mechanical engineers, Czech national code of equipment and piping of nuclear power plants of WWER type

68 Clamping force effects on the performance of mechanically attached piezoelectric transducers for impedance-based NDE

69 Research on the Application of Automation Software Control System in Tea Garden Mechanical Picking

70 Impact of mechanical thrombectomy device on thrombus histology in acute embolic stroke.

71 Physical and mechanical characterization of gypsum boards containing phase change materials for latent heat storage

72 Effect of CNTs in Copper Matrix on Mechanical Characteristics and Tribological Behavior under Dry Sliding and Boundary Lubrication Conditions.

73 Looking for diagnostics parameters of bearings of the gas turbine engine LM 2500 on the basis of mechanical contaminations in the lubricating oil

74 Reversible Hydrogel Photopatterning: Spatial and Temporal Control over Gel Mechanical Properties Using Visible Light Photoredox Catalysis

75 Prediction of mechanical properties of rubberised concrete exposed to elevated temperature using ANN

76 Effect of Extrusion Temperature on the Microstructure and Mechanical Properties of SiCnw/2024Al Composite.

77 Design of Dual Hybrid Network Natural Rubber-SiO Elastomers with Tailored Mechanical and Self-Healing Properties.

78 Healable and Mechanically Super-Strong Polymeric Composites Derived from Hydrogen-Bonded Polymeric Complexes.

79 Effect of comingling techniques on mechanical properties of natural fibre reinforced cross-ply thermoplastic composites

80 Experimental study on mechanical behavior, biodegradability, and resistance to natural weathering and ultraviolet radiation of wood-plastic composites

81 Green Synthesis of Aluminium Oxide Nanoparticles and its Applications in Mechanical and Thermal Stability of Hybrid Natural Composites

82 Improving Mechanical Properties and Reaction to Fire of EVA/LLDPE Blends for Cable Applications with Melamine Triazine and Bentonite Clay

83 A note on the roles of quantum and mechanical models in social biophysics.

84 Structural and mechanical characterization of custom design cranial implant created using additive manufacturing

85 ThE EFFECT OF METAKOLIN, MICROSILICA AND NANOSILICA ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CEMENT MORTAR

86 Microstructure and mechanical properties of additive manufactured porous Ti-33Nb-4Sn scaffolds for orthopaedic applications.

87 Selective Laser Melting of Duplex Stainless Steel 2205: Effect of Post-Processing Heat Treatment on Microstructure, Mechanical Properties, and Corrosion Resistance.

88 Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting

89 Investigation into using resonant frequency measurements to predict the mechanical properties of Ti-6Al-4V manufactured by selective laser melting

90 Microstructure and mechanical properties of as-deposited and heat treated Ti–5Al–5Mo–5V–3Cr–1Zr (Ti-55531) alloy fabricated by laser melting deposition

91 Improved mechanical properties of AlSi7Mg/nano-SiCp composites fabricated by selective laser melting

92 Selective laser melting additive manufacturing of pure tungsten: Role of volumetric energy density on densification, microstructure and mechanical properties

93 Statistical study on the mechanical characteristics when drilling sintethyc granite

94 Diamond-like carbon films over reconstructive TMJ prosthetic materials: Effects in the cytotoxicity, chemical and mechanical properties

95 Review on the Management at Mechanical Engineering Discipline of the National Natural Science Foundation of China in 2018

96 Study on physical and mechanical properties of the biopolymer/silver based active nanocomposite films with antimicrobial activity.

97 Investigation of thermal, mechanical, morphological and optical properties of polyvinyl alcohol films reinforced with buddha coconut (Sterculia alata) leaf fiber

98 Investigation of Mechanical Properties of Silicone/Phosphor Composite Used in Light Emitting Diodes Package.

99 Prediction of mechanical behaviour of adhesively bonded CFRP scarf jointed specimen under tensile loading using localised DIC and CZM

100 Molecular dynamics based cohesive zone modeling of Al (metal)–Cu50Zr50 (metallic glass) interfacial mechanical behavior and investigation of dissipative mechanisms

101 Efficacy and efficiency of poultry carcass composting using different mechanical mixing equipment for avian influenza outbreaks

Keyword Connections

Journals

Research Groups

Bibliographies