12 Morphological and rheological study of the epoxy polymer and their nanocomposite (NGTHTPTBAE/MDA/TSP) crosslinked by methylene dianiline and formulated by trisodium phosphate

13 RAMAN SPECTROSCOPY AND CURE KINETICS STUDIES OF A DLS 772 AND 4 4’DDS EPOXY SYSTEM DURING THERMAL AND MICROWAVE CURING

14 Epoxy Resin’s Influence in Metakaolin-Based Geopolymer’s Antiseawater Corrosion Performance

15 Tuned Local Surface potential of Epoxy Resin Composites by Inorganic Core-Shell Microspheres: The key roles of interface.

16 Electrical Resistance Prediction for Functionalized Multi-Walled Carbon Nanotubes/Epoxy Resin Composite Gasket under Thermal Creep Conditions.

17 Enhanced thermal and mechanical properties of epoxy composites by mixing thermotropic liquid crystalline epoxy grafted graphene oxide

18 Improving Fracture Toughness of Epoxy Nanocomposites by Silica Nanoparticles

19 Epoxy/oil micro-bead lubricating heat-resistant coating based on opening valve

20 Survey data on thermal properties of different hyperbranched polymers (HBPs) and on morphological and thermal analysis of the corresponding epoxy matrix nanocomposites.

21 Mode I Interlaminar Fracture of Glass/Epoxy Unidirectional Laminates. Part II: Numerical Analysis.

22 Identification and determination of deoxynivalenol (DON) and deepoxy-deoxynivalenol (DOM-1) in pig colostrum and serum using liquid chromatography in combination with high resolution mass spectrometry (LC-MS/MS (HR))

23 Non-linear viscoelasticity of epoxy resins: Molecular simulation-based prediction and experimental validation

24 Epoxy Composites with Reduced Graphene Oxide-Cellulose Nanofiber Hybrid Filler and Their Application in Concrete Strain and Crack Monitoring.

25 A simplified parameterization of isoprene-epoxydiol-derived secondary organic aerosol (IEPOX-SOA) for global chemistry and climate models: A case study with GEOS-Chem v11-02-rc

26 Thermal Decomposition Studies of EPS Foam, Polyurethane Foam, and Epoxy Resin (SLA) as Patterns for Investment Casting; Analysis of Hydrogen Cyanide (HCN) from Thermal Degradation of Polyurethane Foam

27 Preparation and investigation of novel diatomite-supported epoxy resin-modified asphalt binder

28 Facile synthesis of aluminum branched oligo(phenylphosphonate) submicro-particles with enhanced flame retardance and smoke toxicity suppression for epoxy resin composites.

29 Cure and damage monitoring of flax fiber-reinforced epoxy composite repairs for civil engineering structures using embedded piezo micro-patches

30 Influence of elevated temperatures on epoxy adhesive used in CFRP strengthening systems for civil engineering applications

31 Compression after Impact Behaviour and Failure Analysis of Nanosilica-Toughened Thin Epoxy/GFRP Composite Laminates.

32 Improving Interlaminar Fracture Toughness and Impact Performance of Carbon Fiber/Epoxy Laminated Composite by Using Thermoplastic Fibers.

33 Numerical simulation correlating the low velocity impact behaviour of flax/epoxy laminates

34 Analysis of dynamic mechanical, low-velocity impact and compression after impact behaviour of benzoyl treated sugar palm/glass/epoxy composites

35 Improving the Vertical Thermal Conductivity of Carbon Fiber-Reinforced Epoxy Composites by Forming Layer-by-Layer Contact of Inorganic Crystals.

36 Different Methods of Dispersing Carbon Nanotubes in Epoxy Resin and Initial Evaluation of the Obtained Nanocomposite as a Matrix of Carbon Fiber Reinforced Laminate in Terms of Vibroacoustic Performance and Flammability.

37 Novel Antibacterial and Toughened Carbon-Fibre/Epoxy Composites by the Incorporation of TiO Nanoparticles Modified Electrospun Nanofibre Veils.

38 Tensile failure of fibre-metal-laminates made of titanium and carbon-fibre/epoxy laminates

39 Toughening efficiency and mechanism of carbon fibre epoxy matrix composites by PEK-C

40 Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part I—Characterisation of Thermophysical Properties

41 Experimental analysis of aluminium/carbon epoxy hybrid laminates under flexural load

42 Interlaminar fracture in woven carbon/epoxy laminates

43 On the machinability and surface finish of cutting nanoparticle and elastomer modified epoxy

44 Electrochemical discharge machining of glass fiber-reinforced epoxy composites: A challenging approach

45 Capacitance-based sensor with layered carbon-fiber reinforced polymer and titania-filled epoxy

46 Flame Retardancy of Low-Viscosity Epoxy Resins and Their Carbon Fibre Reinforced Composites via a Combined Solid and Gas Phase Mechanism

47 Synergy of Epoxy Chemical Tethers and Defect-Free Graphene in Enabling Stable Lithium Cycling of Silicon Nanoparticles.

48 One-pot synthesis and construction of a high performance metal-organic structured nano pigment based on nanoceria decorated cerium (III)-imidazole network (NC/CIN) for effective epoxy composite coating anti-corrosion and thermo-mechanical properties improvement

49 Designing a dual-functional epoxy composite system with self-healing/barrier anti-corrosion performance using graphene oxide nano-scale platforms decorated with zinc doped-conductive polypyrrole nanoparticles with great environmental stability and non-toxicity

50 The chemical and microstructural analysis of the adhesive properties of epoxy resin coatings modified using waste glass powder

51 Fabrication of coatings based on epoxy resins for environmental protection of microelectronics

52 A dataset of void characteristics in multidirectional carbon fiber/epoxy composite laminates, obtained using X-ray micro-computed tomography.

53 High thermal conductive epoxy based composites fabricated by multi-material direct ink writing

54 Recycling process for carbon fiber reinforced plastics with polyamide 6, polyurethane and epoxy matrix by gentle solvent treatment.

55 A comparative study of curaua waste fibers reinforced epoxy matrix composites as building material

56 Epoxy-based composites reinforced with African teff straw (Eragrostis tef) for lightweight applications

57 Influence of Storage Time and Temperature on the Toxicity, Endocrine Potential, and Migration of Epoxy Resin Precursors in Extracts of Food Packaging Materials.

58 New Biosourced Flame Retardant Agents Based on Gallic and Ellagic Acids for Epoxy Resins.

59 Bio-Based Aromatic Epoxy Monomers for Thermoset Materials

60 Photo-thermally cured eugenol-derived epoxy resins by simultaneous thiol-ene/thiol-epoxy/thiol-maleimide triple “click” reactions

61 Effect of Epoxy Adhesive on Nugget Formation in Resistance Welding of SAE1004/DP600/DP780 Steel Sheets.

62 New Epoxy Thermosets Derived from Clove Oil Prepared by Epoxy-Amine Curing.

63 Effect of Cellulosic and Rockwool Fibres on Mechanical strengths and Ballistic Impact of Epoxy-bentonite NanoComposite

64 Effect of addition of clay minerals on the properties of epoxy/polyester powder coatings

65 Physico-chemical investigation of endodontic sealers exposed to simulated intracanal heat application: epoxy resins and zinc-oxide eugenols.

66 CYP2J2-produced epoxyeicosatrienoic acids attenuate ischemia/reperfusion-induced acute kidney injury by activating the SIRT1-FoxO3a pathway

67 Switching of regioselectivity in base-mediated diastereoselective annulation of 2,3-epoxy tosylates and their N-tosylaziridine analogs with 2-mercaptobenzimidazole.

68 Enhanced corrosion protection of mild steel by the synergetic effect of zinc aluminum polyphosphate and 2-mercaptobenzimidazole inhibitors incorporated in epoxy-polyamide coatings

69 19β,28-Epoxy-18α-olean-3β-ol

70 Effect of Incorporated ZnO Nanoparticles on the Corrosion Performance of SiO 2 Nanoparticle-Based Mechanically Robust Epoxy Coatings

71 dielectric behaviour of cacu3ti4o12-epoxy composites

72 corrosion behavior of three nanoclay dispersion methods of epoxy/organoclay nanocomposites

73 preparation and characterization of acetic acid lignin-based epoxy blends

74 modification of a phenolic resin with epoxy- and methacrylate-functionalized silica sols to improve the ablation resistance of their glass fiber-reinforced composites

75 investigations using potentiodynamic polarization measurements, cure durability, ultra violet immovability and abrasion resistance of polyamine cured ilmenite epoxy coating for oil and gas storage steel tanks in petroleum sector

76 characterization of anion exchange membrane containing epoxy ring and c–cl bond quaternized by various amine groups for application in fuel cells

77 inclusion of cfrp-epoxy composite for end anchorage in nsm-epoxy strengthened beams

78 evaluation of softening ability of xylene & endosolv-r on three different epoxy resin based sealers within 1 to 2 minutes - an in vitro study

79 influence of end groups in hyperbranched polyesters used as modifiers in the characteristics of epoxy thermosets cured by adipic dihydrazide

80 improvement of fatigue resistance of epoxy composite with microencapsulated epoxy-sbf5 self-healing system

81 radar absorbing nanocomposites based multilayered graphene platelets/epoxy

82 Toughening mechanisms in cost-effective carbon-epoxy laminates with thermoplastic veils: Mode-I and in-situ SEM fracture characterisation

83 anti-inflammatory effects of epoxyeicosatrienoic acids

84 apical microleakage of epoxy resin and methacrylate resin-based sealer with continuous wave obturation technique

85 crystal structure of an epoxysterol: 9α,11α-epoxy-5α-cholest-7-ene-3β,5,6α-triol 3,6-diacetate

86 carbon nanotube-epoxy nanocomposites: correlation and integration of dynamic impedance, dielectric, and mechanical analyses

87 relationship between the process parameters and resin content of a glass/epoxy prepreg produced by dipping method

88 titanium implant osseointegration problems with alternate solutions using epoxy/carbon-fiber-reinforced composite

89 characterization of short e-glass fiber reinforcedgraphite and bronze filled epoxy matrix composites

90 thermo-mechanical characterization of epoxy nanocomposites with different carbon nanotube distributions obtained by solvent aided and direct mixing.

91 sifat fisik hidroksiapatit sintesis kalsit sebagai bahan pengisi pada sealer saluran akar resin epoxy (physical properties of calcite synthesized hydroxyapatite as the filler of epoxy-resin-based root canal sealer)

92 effect of modification with various epoxide compounds on mechanical, thermal, and coating properties of epoxy resin

93 current-voltage characteristics of the composites based on epoxy resin and carbon nanotubes

94 interdigital piezopolymer transducers for time of flight measurements with ultrasonic lamb waves on carbon-epoxy composites under pure bending stress

95 healing of fatigue crack in epoxy materials with epoxy/mercaptan system via manual infiltration

96 modificação de fibra de carbono com pblh e sua utilização em compósitos com resina epoxídica hydroxyl-terminated polybutadiene-grafted carbon fiber in epoxy resin-based composites

97 plasma treated multi-walled carbon nanotubes (mwcnts) for epoxy nanocomposites

98 trifunctional epoxy resin composites modified by soluble electrospun veils: effect on the viscoelastic and morphological properties

99 influence of hematite nanorods on the mechanical properties of epoxy resin

100 epoxy resin composite bilayers with triple-shape memory effect

101 self-lubricating, wear resistant protic ionic liquid-epoxy resin

Keyword Connections

Journals

Research Groups

Bibliographies