9 Interactions of phospholipid- and poly(ethylene glycol)-modified surfaces with biological systems: Relation to physico-chemical properties and mechanisms

10 Phenomenon and Mechanism of Spray Cooling on Nanowire Arrayed and Hybrid Micro/ Nanostructured Surfaces

11 Phenomenon and Mechanism of Spray Cooling on Nanowire Arrayed and Hybrid Micro/ Nanostructured Surfaces

12 Porous Microstructured Surfaces with pH-Triggered Antibacterial Properties.

13 A density functional study of the adsorption of methane-thiol on the (111) surfaces of the Ni-group metals: I. Molecular and dissociative adsorption.

14 Tuiofx - A JavaFX Toolkit for shared interactive surfaces

15 CRYSPLOT: A new tool to visualize physical and chemical properties of molecules, polymers, surfaces, and crystalline solids.

16 A New Method of Distribution of Measurement Points on Curvilinear Surfaces of Products.

17 Efficient removal of hospital pathogens from hard surfaces by a combined use of bacteriophages and probiotics: potential as sanitizing agents [Corrigendum]

18 Efficient removal of hospital pathogens from hard surfaces by a combined use of bacteriophages and probiotics: potential as sanitizing agents [Corrigendum]

19 Printability and Properties of Conductive Inks on Primer-Coated Surfaces

20 Accurate Potential Energy Surfaces for the Three Lowest Electronic States of N(2D) + H2(X1∑g+) Scattering Reaction

21 White-Light-Activated Antibacterial Surfaces Generated by Synergy between Zinc Oxide Nanoparticles and Crystal Violet

22 Biomimetic polymeric superamphiphobic surfaces: their fabrication and applications.

23 MRI and localised NMR spectroscopy of sessile droplets on hydrophilic, hydrophobic and superhydrophobic surfaces - Examination of the chemical composition during evaporation.

24 DFT Study of Azole Corrosion Inhibitors on Cu2O Model of Oxidized Copper Surfaces: I. Molecule–Surface and Cl–Surface Bonding

25 Extreme Asymmetry in Metasurfaces via Evanescent Fields Engineering: Angular-Asymmetric Absorption.

26 Semi-empirical correlations of pollution processes on the condensation surfaces of exhaust gas boilers with water-fuel emulsion combustion

27 Effectiveness of disinfectant wipes for decontamination of bacteria on patients' environmental and medical equipment surfaces at Siriraj Hospital.

28 Usability evaluation of detectable warning surfaces in Quebec City (Canada): an exploratory study.

29 Review of low-GWP refrigerant pool boiling heat transfer on enhanced surfaces.

30 Topology optimization of metasurfaces for anomalous reflection of longitudinal elastic waves

31 Effect of Food Residues in Biofilm Formation on Stainless Steel and Polystyrene Surfaces by Salmonella enterica Strains Isolated from Poultry Houses

32 Towards fast and reliable potential energy surfaces for metallic Pt clusters by hierarchical delta neural networks.

33 Multistimuli-Responsive Microstructured Superamphiphobic Surfaces with Large-Range, Reversible Switchable Wettability for Oil.

34 Durable omniphobicity of oil-impregnated anodic aluminum oxide nanostructured surfaces.

35 PDMS-Infused Poly(High Internal Phase Emulsion) Templates for the Construction of Slippery Liquid-Infused Porous Surfaces with Self-cleaning and Self-repairing Properties.

36 Mobility of Aqueous and Binary Mixture Drops on Lubricating Fluid-Coated Slippery Surfaces.

37 Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity.

38 Antibacterial superhydrophobic polyvinyl chloride surfaces via the improved phase separation process using silver phosphate nanoparticles.

39 Peritoneal spaces. Measurements of peritoneal surfaces

40 Full and fragmented permutationally invariant polynomial potential energy surfaces for trans and cis N-methyl acetamide and isomerization saddle points.

41 Temperature Field Simulation of Gyro Unit-Platform Assembly Accounting for Thermal Expansion and Roughness of Contact Surfaces

42 Plasmon-coupled 3D porous hotspot architecture for super-sensitive quantitative SERS sensing of toxic substances on real sample surfaces.

43 Rapid prototyping of Nanoroughened polydimethylsiloxane surfaces for the enhancement of immunomagnetic isolation and recovery of rare tumor cells

44 A roGFP2-based bacterial bioreporter for redox sensing of plant surfaces.

45 Deposition of nanoparticles onto polysaccharide-coated surfaces: Implications for nanoparticle-biofilm interactions

46 Aerodynamic layout optimization design of a barrel-launched UAV wing considering control capability of multiple control surfaces

47 Supramolecular Tessellations at Surfaces by Vertex Design.

48 Two-state diabatic potential energy surfaces of ClH based on nonadiabatic couplings with neural networks.

49 Synthesis, crystal structure, DFT calculations, Hirshfeld surfaces, and antibacterial activities of schiff base based on imidazole

50 Facile preparation of mussel-inspired antibiotic-decorated titanium surfaces with enhanced antibacterial activity for implant applications

51 Hierarchical Superhydrophobic Surfaces with Micropatterned Nanowire Arrays for High-Efficiency Jumping Droplet Condensation.

52 DNA-Hybridization Detection on Si(100) Surfaces Using Light-Activated Electrochemistry: A Comparative Study between Bovine Serum Albumin and Hexaethylene Glycol as Antifouling Layers

53 Numerical and experimental investigation of the indoor air quality and thermal comfort performance of a low energy cooling windcatcher with heat pipes and extended surfaces

54 Asymmetric Spatial Power Dividers Using Phase-Amplitude Metasurfaces Driven by Huygens Principle.

55 Correction to: Tuning chemistry and topography of nanoengineered surfaces to manipulate immune response for bone regeneration applications (ACS Nano (2017) 11 (5) (4494-4506) DOI: 10.1021/acsnano.6b07808)

56 Fundamental steps toward next-generation intelligent automatic process in a faster and cost-effective chain for processing optical surfaces.

57 Porosity effects in laminar fluid flow near permeable surfaces.

58 Inactivation of Biofilms on Food Contact Surfaces by Superheated Steam Treatment.

59 Extraction of surface curvatures from tool path data and prediction of cutting forces in the finish milling of sculptured surfaces

60 An analytical model for cutter-workpiece engagement calculation in ball-end finish milling of doubly curved surfaces

61 Templated assembly of micropatterned Au-Ni nanoparticles on laser interference-structured surfaces by thermal dewetting

62 High-Temperature Refractory Metasurfaces for Solar Thermophotovoltaic Energy Harvesting.

63 Limits determination of microbial contamination present on surfaces from a pharmaceutical microbiology district reference laboratory

64 Ricocheting Droplets Moving on Super-Repellent Surfaces.

65 Facile fabrication of functional PDMS surfaces with tunable wettablity and high adhesive force via femtosecond laser textured templating

66 Broadband metasurfaces for anomalous transmission and spectrum splitting at visible frequencies

67 The ability of Listeria monocytogenes to form biofilm on surfaces relevant to the mushroom production environment.

68 Deciphering the Mechanisms of Bacterial Inactivation on HiPIMS Sputtered CuO-FeO-PET Surfaces: From Light Absorption to Catalytic Bacterial Death.

69 Surgical Reconstruction of the Metatarsal Pad Using Nonweight-Bearing Surfaces of the Footpads in a Dog.

70 Detection of Micro-Defects on Irregular Reflective Surfaces Based on Improved Faster R-CNN.

71 Mechanochromic Reconfigurable Metasurfaces.

72 A hierarchical butterfly LU preconditioner for two-dimensional electromagnetic scattering problems involving open surfaces

73 Thermophysical behaviour of LULC surfaces and their effect on the urban thermal environment

74 Probing the interaction mechanism between oil droplets with asphaltenes and solid surfaces using AFM

75 The interaction of streptococcal enolase with canine plasminogen: the role of surfaces in complex formation.

76 Scalable Inkjet-Based Structural Color Printing by Molding Transparent Gratings on Multilayer Nanostructured Surfaces.

77 HO Adsorption on WO and WO (001) Surfaces.

78 Bioinspired surfaces with wettability for antifouling application.

79 Expansion of Impervious Surfaces and Their Driving Forces in Highly Urbanized Cities in Kyrgyzstan.

80 Enhancing anti-reflective and hydrophobic properties of glass surfaces by nanostructuration and grafting of saturated carbon chains

81 Comparison of PCR/Electron spray Ionization-Time-of-Flight-Mass Spectrometry versus Traditional Clinical Microbiology for active surveillance of organisms contaminating high-use surfaces in a burn intensive care unit, an orthopedic ward and healthcare workers

82 Photocatalytic biocidal effect of copper doped TiO2 nanotube coated surfaces under laminar flow, illuminated with UVA light on Legionella pneumophila.

83 Any-degrees-of-freedom (anyDOF) registration for the characterization of freeform surfaces

84 Application of GRAS Compounds for the Control of Mould Growth on Scots Pine Sapwood Surfaces: Multivariate Modelling of Mould Grade

85 Improved description of hematite surfaces by the SCAN functional.

86 Revealing stable geometries and magic clusters of hexagonal boron nitride in the nucleation of chemical vapor deposition growth on Ni(111)/Cu(111) surfaces: a theoretical study.

87 Modeling the non-equilibrium process of the chemical adsorption of ammonia on GaN(0001) reconstructed surfaces based on steepest-entropy-ascent quantum thermodynamics

88 Low Pt-content ternary PtNiCu nanoparticles with hollow interiors and accessible surfaces as enhanced multifunctional electrocatalysts.

89 An integrated solution for semi-automatic segmentation of volumetric ultrasound data based on B-spline explicit active surfaces

90 Integrating All-Atom and Coarse-Grained Simulations-Toward Understanding of IDPs at Surfaces.

91 Water Structure and Properties at Hydrophilic and Hydrophobic Surfaces.

92 Microbial contamination in food, food-handlers’ hands and surfaces and evaluation of contamination sources by the similarity between isolates

93 Reply to “Comment on Tailleux, R. Neutrality Versus Materiality: A Thermodynamic Theory of Neutral Surfaces. Fluids 2016, 1, 32.”

94 Grafting of calcium chelating functionalities onto PLA monofilament fiber surfaces.

95 Van der Waals thin films of WTe2 for natural hyperbolic plasmonic surfaces

96 Fundamental Principles of the Thermodynamics and Kinetics of Protein Adsorption to Material Surfaces

97 Resonant Charge-Transfer in Grazing Collisions of H− with Vicinal Nanosurfaces on Cu(111), Au(100) and Pd(111) Substrates: A Comparative Study

98 Quantifying the relationship between surfaces' nano-contact point density and adhesion force of Candida albicans.

99 Universal method for direct bioconjugation of electrode surfaces by fast enzymatic polymerization.

100 Enzyme-catalyzed modification of PES surfaces: Reduction in adsorption of BSA, dextrin and tannin

101 Combination of Spatial and Frequency Domains for Floating Object Detection on Complex Water Surfaces

Keyword Connections

Journals

Research Groups

Bibliographies