6 influência das energias de superfícies e interfaces na densificação durante a sinterização: um modelo geométrico the influence of surface and interface energies during sintering: a geometric approach

7 addition of sedimentary rock to kaolinitic clays: influence on sintering process adição de rocha sedimentar às argilas cauliníticas: influência no processo de sinterização

8 sintering al2o3-cr composites made from micro-and nan powders

9 characterization of cadmium substituted nickel ferrites prepared using auto-combustion technique

10 properties of sintered al2o3-cr composites depending on the method of preparation of the powder mixture

11 titanium powder sintering in a graphite furnace and mechanical properties of sintered parts

12 production of al2o3–sic nano-composites by spark plasma sintering

13 wear behaviour of a356/tial3 in situ composites produced by mechanical alloying

14 processing effects on the thermoelectric properties of bi2ca2co1.7ox ceramics

15 modelling and microstructural characterization of sintered metallic porous materials

16 effect of different compaction pressure and different sintering route on k0.5na0.5nbo₃ physical and dielectric properties

17 investigation of zinc stannate synthesis using photoacoustic spectroscopy

18 synthesis of 0.64pb(mg1/3nb2/3)o3–0.36pbtio3 ceramic near morphotropic phase boundary for high performance piezoelectric, ferroelectric and pyroelectric applications

19 particle morphology of hydroxyapatite and its influence on the properties of biocomposite plasma coatings

20 influence of various process parameters on the density of sintered aluminium alloys

21 debinding and sintering of an injection-moulded hypereutectic al–si alloy

22 Structure and Properties of Co-Cr-Mo Alloy Manufactured by Powder Injection Molding Method

23 Role of Sintering Temperature in Production of Nepheline Ceramics-Based Geopolymer with Addition of Ultra-High Molecular Weight Polyethylene

24 Effects of low-temperature sintering on surface morphology and electrical performance of silver nanoparticle/carbon nanotube composite films

25 Wear Resistance of (Diamond-Ni)-Ti6Al4V Gradient Materials Prepared by Combined Selective Laser Melting and Spark Plasma Sintering Techniques

26 Influences of fine-grained NaCl particles on performance and denitration efficiency of activated carbon during sintering flue gas purification process.

27 Liquid-Film Assisted Mechanism of Reactive Flash Sintering in Oxide Systems.

28 Laser sintering process optimization of microstrip antenna fabricated by inkjet printing with silver-based MOD ink

29 TiO2 ceramics prepared using Pechini synthesis and laser sintering

30 3D non-isothermal phase-field simulation of microstructure evolution during selective laser sintering

31 Flash sintering of ceramic materials

32 Effect of sintering on the structure, microstructure and electrical properties of mechanosynthesized Y<inf>2</inf>O<inf>3</inf> and Dy<inf>2</inf>O<inf>3</inf> alloyed ceria nanoparticles: A comparative study

33 Electrical properties of gadolinia doped ceria electrolytes fabricated by infiltration aided sintering

34 Microstructure evolution during pressureless sintering of bulk oxide ceramics

35 Nano oxide intermediate layer assisted room temperature sintering of ink-jet printed silver nanoparticles pattern.

36 Synthesis and 3D Interconnected Nanostructured h‑BN-Based Biocomposites by Low-Temperature Plasma Sintering: Bone Regeneration Applications

37 W-Cu composites reinforced by copper coated graphene prepared using infiltration sintering and spark plasma sintering: A comparative study

38 Effect of sintering temperature on microstructure and properties of graphene-reinforced copper matrix composites

39 Effect of sintering pressure on the microstructure and properties of graphene-reinforced copper matrix composites

40 Mechanical properties of graphene nanoplates reinforced copper matrix composites prepared by electrostatic self-assembly and spark plasma sintering

41 Microstructure, mechanical and magnetocaloric properties of bulk La<inf>0.9</inf>Ce<inf>0.1</inf>Fe<inf>11.7-x</inf>Mn<inf>x</inf>Si<inf>1.3</inf> hydrides prepared by high-hydrogen-pressure sintering

42 Investigation of molding and sintering parameters of feedstock prepared from Ti-6Al-4V alloy powder

43 Additive manufacturing technology (direct metal laser sintering) as a novel approach to fabricate functionally graded titanium implants: preliminary investigation of fabrication parameters.

44 Rapid fabrication of diffusion barrier between metal electrode and thermoelectric materials using current-controlled spark plasma sintering technique

45 On the synchronicity of flash sintering and phase transformation

46 The UO<inf>2</inf> ex-ADU powder preparation and pellet sintering for optimum efficiency: experimental and modeling studies

47 Accuracy of removable partial denture framework fabricated by casting with a 3D printed pattern and selective laser sintering.

48 Dynamic Fracture Toughness of TaC/CNTs/SiC CMCs Prepared by Spark Plasma Sintering

49 Determination of porosity from shrinkage curves during sintering of granular materials

50 Effect of sintering temperature and heat treatment on microstructure and properties of nickel-based superalloy

51 Processing of Polysulfone to Free Flowing Powder by Mechanical Milling and Spray Drying Techniques for Use in Selective Laser Sintering

52 Contactless flash sintering based on cold plasma

53 Sintering and agglomeration of Fe<inf>2</inf>O<inf>3</inf>-MgAl<inf>2</inf>O<inf>4</inf> oxygen carriers with different Fe<inf>2</inf>O<inf>3</inf> loadings in chemical looping processes

54 Microstructural Evolution and Mechanical Properties of an Advanced γ-TiAl Based Alloy Processed by Spark Plasma Sintering.

55 Powder Filling and Sintering of 3D In-chip Solenoid Coils with High Aspect Ratio Structure.

56 Bimodal Microstructure in an AlZrTi Alloy Prepared by Mechanical Milling and Spark Plasma Sintering

57 Pressureless sintering of β-sialon with improved green strength by using metallic Al powder

58 Bimodal Microstructure in an AlZrTi Alloy Prepared by Mechanical Milling and Spark Plasma Sintering

59 a comparative study of the sintering behavior of pure and manganese-substituted hydroxyapatite

60 potential use of only yb2o3 in producing dense si3n4 ceramics with high thermal conductivity by gas pressure sintering

61 effects of sintering temperature on the morphology and photoluminescence of eu3+ doped zinc molybdenum oxide hydrate

62 dependence of crystallizing phase dielectric permittivity on time of glass-ceramics sintering

63 enhancing thermoelectric properties of si80ge20 alloys utilizing the decomposition of nabh4 in the spark plasma sintering process

64 preparation of titanium diboride tib2 by spark plasma sintering at slow heating rate

65 plasma sintering of unalloyed iron: a study of surface porosity

66 an evaluation of the gap sizes of 3-unit fixed dental prostheses milled from sintering metal blocks

67 large-scale synthesis of silver nanoparticles by aqueous reduction for low-temperature sintering bonding

68 fabrication and sintering behavior of er:srf2 transparent ceramics using chemically derived powder

69 influence of mno₂ additions to band₂ti₄o₁₂ microwave ceramics on sintering behavior and dielectric properties

70 interfacial behavior of fe76si9b10p5/zn0.5ni0.5fe2o4 amorphous soft magnetic composite during spark plasma sintering process

71 enhanced ferroelectricity and magnetoelectricity in 0.75batio3-0.25bafe12o19 by spark plasma sintering

72 synthesis and characterization of zn-nix advanced alloys prepared by mechanical milling and sintering at solid-state process

73 effects of sintering temperature on the phase developments and mechanical properties ifon clay

74 Combined application of femtosecond laser and air-abrasion protocols to monolithic zirconia at different sintering stages: Effects on surface roughness and resin bond strength.

75 consolidation of b4c-tab2 eutectic composites by spark plasma sintering

76 towards low-friction and wear-resistant plasma sintering dies via plasma surface co-alloying cm247 nickel alloy with v/ag and n

77 influence of the uniaxial hot-pressing sintering condition on bi4ge3o12 ceramic scintillators

78 retracted: h. belhouchet, h. makri, m. hamidouche, n. bouaouadja, v. garnier, g. fantozzi: multiphase composites obtained by sintering reaction of boehmite and zircon part i: development and microstructural characterization, science of sintering, 2014, vol. 46 br. 3 doi: 10.2298/sos1403291b

79 an in situ study of niti powder sintering using neutron diffraction

80 microwave rapid sintering of al-metal matrix composites: a review on the effect of reinforcements, microstructure and mechanical properties

81 the effect of lithium doping on the sintering and grain growth of sps-processed, non-stoichiometric magnesium aluminate spinel

82 microwave fast sintering of submicrometer alumina

83 influence of sintering temperature on crystallization behavior of cordierite synthesized from non-stoichiometric formulation

84 effect of polymorphism of al2o3 on sintering and grain growth of magnesia aluminate spinel

85 influence of manganese on the sintering properties of tetragonal zirconia

86 monoclinic zirconia sintered bodies prepared via two-step sintering and characterisation of selected mechanical properties

87 spark plasma sintering as a solid-state recycling technique: the case of aluminum alloy scrap consolidation

88 discussion on microwave-matter interaction mechanisms by in situ observation of “core-shell” microstructure during microwave sintering

89 brush-painting and photonic sintering of copper oxide and silver inks on wood and cardboard substrates to form antennas for uhf rfid tags

90 construction of master sintering curve of tho2 pellets using optimization technique

91 microstructure, mechanical, and biological properties of porous poly(vinylidene fluoride) scaffolds fabricated by selective laser sintering

92 Sintering under a high-power electron beam

93 Development of Polymer-Ceramic-Metal Graded Acoustic Matching Layers via Cold Sintering.

94 Surface topology of MXene flakes induces the selection of the sintering mechanism for supported Pt nanoparticles.

Keyword Connections

Journals

Research Groups

Bibliographies