9 circuitos de uso de crack na região central da cidade de são paulo (sp, brasil) crack usage circuits in the downtown area of the city of são paulo (sp, brazil)

10 analisis pengaruh ketebalan nonconductive coating terhadap kemampuan pendeteksian panjang dan kedalamanretak padafilletjoint bracket kapalaluminium menggunakan pengujian ultrasonik

11 mechanisms of hydraulic fracturing in cohesive soil

12 analisis faktor intensitas tegangan (sif) dengan variasi panjang retak pada pelat geladak utama kapal “ mt. klawotong “ dengan menggunakan metode elemen hingga (fem)

13 fracture toughness estimation of ballast stone used in iranian railway

14 diógenes e o corpo “fabricador de drogas”: o estatuto do corpo no uso abusivo de crack e nas situações de precariedade e vulnerabilidade social

15 Synthesis of core-shell structured FAU/SBA-15 composite molecular sieves and their performance in catalytic cracking of polystyrene.

16 Effects of cooking temperature in repetitive cooking-chilling cycles on resistant starch content and quality characteristics of fish crackers

17 Increasing resistant starch content in fish crackers through repetitive cooking-chilling cycles

18 Effect of bambara groundnut supplementation on the physicochemical properties of rice flour and crackers.

19 Experimental research on explosively driven crack initiation and propagation from flaws of various geometry

20 Mind the gap: how vulnerable patients fall through the cracks of cancer quality metrics.

21 Catalytic cracking of palm oil for the production of biofuels: optimization studies.

22 Experimental investigation of failure behavior of the cracked 17-4PH steel blades in a top gas energy recovery turbine

23 2D and 3D characterization of rolling contact fatigue cracks in manganese steel wing rails from a crossing

24 Crack propagation behavior in white etching layer on rail steel surface

25 Prediction of fatigue crack propagation and fractography of rail steel

26 Fatigue crack growth under non-proportional mixed mode loading in rail and wheel steel Part 1: Sequential mode I and mode II loading

27 The formation of martensite during the propagation of fatigue cracks in pearlitic rail steel

28 Effect of cold work and slow strain rate on 321SS stress corrosion cracking in abnormal conditions of simulated PWR primary environment

29 In-situ observation of crack initiation and propagation in Ni-based superalloy with film cooling holes during tensile test

30 Guided Wave-Convolutional Neural Network Based Fatigue Crack Diagnosis of Aircraft Structures.

31 Detection of Dynamic Modulus and Crack Properties of Asphalt Pavement Using a Non-Destructive Ultrasonic Wave Method

32 Repairing the Cracked lens: Redefining British Muslim Identity in Conservative Britain

33 Study of the brickwork masonry cracking with a cohesive fracture model

34 Vibration-Based, Nondestructive Methodology for Detecting Multiple Cracks in Bending-Torsion Coupled Laminated Composite Beams

35 Ultrasound data for laboratory calibration of an analytical model to calculate crack depth on asphalt pavements.

36 Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy

37 Cracking of platinum/hydrocarbon nanofluids with hyperbranched polymer as stabilizer and initiator

38 Numerical Simulation of Crack Propagation in Flexible Asphalt Pavements Based on Cohesive Zone Model Developed from Asphalt Mixtures.

39 Crack Extension and Possibility of Debonding in Encapsulation-Based Self-Healing Materials.

40 Comparison of two ductile crack propagation models of GTN and CZM for pipe steel fracture

41 New CZM for Interfacial Crack Growth

42 An in situ fatigue-CZM for unified crack initiation and propagation in composites under cyclic loading

43 Numerical modeling of adhesively bonded composite patch repair of cracked aluminum panels with concept of CZM and XFEM

44 Experimental Investigation on Crack Development Characteristics in Shallow Coal Seam Mining in China

45 Influence of Temperature on the Longitudinal Cracking in Multipurpose Precast Concrete Sleepers Prior to Their Installation.

46 Resonance and stability analysis of a cracked gear system for railway locomotive

47 A microstructural model for homogenisation and cracking of piezoelectric polycrystals

48 Enhanced calcite precipitation for crack healing by bacteria isolated under low-nitrogen conditions.

49 Towards Improved Modeling of Variable-Amplitude Fatigue Crack Growth—Theory and Fractographic Validation

50 Representative stress crack resistance of polyolefin geomembranes used in waste management.

51 Catalytic performance of scrap tyre char for the upgrading of eucalyptus pyrolysis derived bio-oil via cracking and deoxygenation

52 A new domain-independent interaction integral for an interface crack subjected to thermal loading

53 Revised Macro-cracking Criterion for Massive Non-reinforced Self-compacting Concrete Structures Under Thermal Load Based on Extensive Experimental Testing and Field Observations

54 Stretchable, Patch-Type Calorie-Expenditure Measurement Device Based on Pop-Up Shaped Nanoscale Crack-Based Sensor.

55 Lamb Wave-Minimum Sampling Variance Particle Filter-Based Fatigue Crack Prognosis.

56 Epoxy Composites with Reduced Graphene Oxide-Cellulose Nanofiber Hybrid Filler and Their Application in Concrete Strain and Crack Monitoring.

57 Effects of Rubber Size on the Cracking Resistance of Rubberized Mortars.

58 A comparative analysis of driving force models for fatigue crack propagation of CFRP-reinforced steel structure

59 Very high-cycle fatigue characteristics of cross-ply CFRP laminates in transverse crack initiation

60 Crack based bond strength model of externally bonded steel plate and CFRP laminate to predict debonding failure of shear strengthened RC beams

61 Controlling the Crack Propagation Path of the Veil Interleaved Composite by Fusion-Bonded Dots.

62 Effects of loading rate on crack growth behavior in carbon fiber reinforced polymer composites using digital image correlation technique

63 The role of service-induced residual stresses in initiating and propagating stress corrosion cracking (SCC) in a 316 stainless steel pressure-relief-valve nozzle set

64 Identification of cracks in eggs shell using computer vision and hough transform

65 A comprehensive investigation on the effect of flood and MQL coolant on the machinability and stress corrosion cracking of super duplex stainless steel

66 Track It to Crack It: Dissecting Processing Stages with Finger Tracking.

67 Quantitative Index and Abnormal Alarm Strategy Using Sensor-Dependent Vibration Data for Blade Crack Identification in Centrifugal Booster Fans.

68 Fatigue Crack Growth Thresholds at Negative Stress Ratio for Ferritic Steels in ASME Code Section XI

69 Adaptive Fault-Tolerant Routing in 2D Mesh with Cracky Rectangular Model

70 X-ray phase contrast observation of solidification and hot crack propagation in laser spot welding of aluminum alloy.

71 Method of crack-free laser writing of microchannels on glass substrates

72 Steam cracking of green diesel (C12) to BTX and olefins over silane-treated hierarchical BEA

73 Environmental effect of steam on crack closure mechanisms of a 9–12% Cr ferritic/martensitic steel

74 Use of Genetically Modified Bacteria to Repair Cracks in Concrete.

75 Bio-remediation of desiccation cracking in clayey soils through microbially induced calcite precipitation (MICP)

76 Desiccation cracking behavior of MICP-treated bentonite

77 Investigation of the crack healing performance in mortar using microbially induced calcium carbonate precipitation (MICP) method

78 Thermal Cracking Analysis of Microbial Cemented Sand under Various Strains Based on the DEM

79 Internal Cracks and Non-Metallic Inclusions as Root Causes of Casting Failure in Sugar Mill Roller Shafts.

80 A high precision crack classification system using multi-layered image processing and deep belief learning

81 Research on crack monitoring at the trailing edge of landslides based on image processing

82 EVALUACIÓN DE GALLETAS CON FIBRA DE CEREALES COMO ALIMENTO FUNCIONAL EVALUATION OF CRACKERS WITH CEREAL FIBER AS A FUNCTIONAL FOOD

83 A Study on Fatigue Crack Propagation for Friction Stir Welded Plate of 7N01 Al-Zn-Mg Alloy by EBSD.

84 Study on Short Fatigue Crack Behaviour of LZ50 Steel Under Non-Proportional Loading.

85 Detection of Crack Locations in Aluminum Alloy Structures Using FBG Sensors.

86 Friction, Abrasion and Crack Growth Behavior of In-Situ and Ex-Situ Silica Filled Rubber Composites.

87 Fracture toughness and crack resistance curves of acrylic bone cements.

88 Direct Observation of Huge Flexoelectric Polarization around Crack Tips.

89 Nanoscopic origin of cracks in carbon fibre-reinforced plastic composites.

90 Comparative modelling of crack propagation in elastic-plastic materials using the meshfree local radial basis point interpolation method and eXtended finite-element method.

91 Relationship Between Matrix Cracking and Delamination in CFRP Cross-Ply Laminates Subjected to Low Velocity Impact.

92 Effect of ultrasonic root-end cavity preparation on dentinal microcrack formation: A micro-computed tomography study.

93 In-situ investigation of crack initiation and propagation in roll-bonded five-ply ASS/Al/Mg/Al/ASS laminated composites during tensile test

94 Material Configurational Forces applied to mixed-mode fatigue crack propagation and life prediction in elastic-plastic material

95 Fatigue characterization and crack propagation mechanism of self-piercing riveted joints in titanium plates

96 Simple and effective approach to modeling crack propagation in the framework of extended finite element method

97 A numerical approach to simulate 3D crack propagation in turbine blades

98 3D concurrent multiscale model for crack propagation in concrete

99 Peridynamic simulation of crack propagation of non-homogeneous brittle rock-like materials

100 Effect of multiphase microstructure on fatigue crack propagation behavior in TRIP-assisted steels

101 On the entropy of fatigue crack propagation

Keyword Connections

Journals

Research Groups

Bibliographies