11 Fracture Energy and Fracture Morphology after Three-Point Bending Test of Welded Joints Made of Cast Steel Designed for Use in Power Sector, with and without the Addition of Rare Earth Metals

12 solubility study of nickel ferrite in boric acid using a flow-through autoclave system under high temperature and high pressure

13 level of decontamination after washing textiles at 60°c or 70°c followed by tumble drying

14 Nanomanufacturing of RGO-CNT Hybrid Film for Flexible Aqueous Al-Ion Batteries.

15 George E. Davis (1850-1907): Transition From Consultant Chemist to Consultant Chemical Engineer in a Period of Economic Pressure.

16 Selective Adsorption and Electrocatalysis of Polysulfides through Hexatomic Nickel Clusters Embedded in N-Doped Graphene toward High-Performance Li-S Batteries.

17 temperature dependence of the primary species yields of liquid water radiolysis by 0.8-mev fast neutrons

18 tailoring a high temperature corrosion resistant fenicral for oxy-combustion application by thermal spray coating and hip

19 improvement of eri silkworm (samia ricini d.) tolerance to high temperature and low humidity conditions by discontinuous regime

20 elastic constants characterization on graphite at 500°c by the virtual fields method

21 an experimental study on mechanical properties of concrete containing steel and polypropylene fibers at high temperatures

22 microsporogenesis and induction of unreduced pollen with high temperatures in rubber tree clone rrim 600

23 thermally sprayed aluminum coatings for the protection of subsea risers and pipelines carrying hot fluids

24 Thermal and Mechanical Characterization of Carbides for High Temperature Nuclear Applications

25 Composition, structure, and electrical properties ofBi2Sr2Ca1−yYyCu2O8: A single-crystal study

26 Impact of heat and ozone stress on rice growth and productivity: interactive and mitigating effects.

27 Direct synthesis and characterization of high temperature stable anatase TiO<inf>2</inf> nanospheres from peroxo-titanium complex

28 Direct synthesis and characterization of high temperature stable anatase TiO<inf>2</inf> nanospheres from peroxo-titanium complex

29 High Temperature Friction and Wear Performance of PVD Coatings under Press Hardening Contact Conditions

30 X-Ray and Termodynamic Studies of the Interactions in Nb-R//2O//3 Systems (R equals Y, Al, Cr) at High Temperatures.

31 High temperature utilization of PAM and HPAM by microbial communities enriched from oilfield produced water and activated sludge.

32 High temperature limit of photosynthetic excitons

33 Stresses evolution at high temperature (200°C) on the interface of thin films in magnetic components

34 Study on rheological properties of aviation lubricating oil under conditions of heavy load, high speed, and high temperature

35 Microstructures of ZrC coated kernels for fuel of Pu-burner high temperature gas-cooled reactor in Japan

36 High efficiency high temperature heat extraction from porous media reciprocal flow burner: Time-averaged model

37 Numerical simulation of porous media combustion for high temperature heat exchanger

38 Comparative Study on Enhancing Oil Recovery under High Temperature and High Salinity: Polysaccharides Versus Synthetic Polymer.

39 Sixteenth International Conference on High Temperature Materials Chemistry (HTMC-XVI)

40 Decreased photosynthetic rate under high temperature in wheat is due to lipid desaturation, oxidation, acylation, and damage of organelles

41 Critical Issues of Double-Metal Layer Coating on FBG for Applications at High Temperatures.

42 The Occurrence and Risk Assessment of Exposure to Aflatoxin M in Ultra-High Temperature and Pasteurized Milk in Hamadan Province of Iran.

43 Destructive and non-destructive experimental investigation of polypropylene fibre reinforced concrete subjected to high temperature

44 Laser shock processing improving the high temperature oxidation resistance of the aluminized coating on GH202 by pack cementation

45 Deposition of Ni-Al coatings by pack cementation and corrosion resistance in high temperature and marine environments

46 Synthesis of Al-Ni coatings by pack cementation and examination of their high temperature oxidation resistance

47 High temperature corrosion behaviour of aluminised FC 25 cast iron using pack cementation

48 High temperature oxidation resistance of electrodeposited Reduced Graphene Oxide (RGO) reinforced copper coating

49 Comments on the paper: “Thermoelectric properties and thermal stress simulation of pressureless sintered SiC/AlN ceramic composites at high temperatures” published by Dina H.A. Besisa in Solar Energy Materials & Solar Cells 182 (2018) 302–313

50 The US Department of Energy's high temperature reactor research and development program – Progress as of 2019

51 Effect of high temperature with Litsea cubeba pers. to control mold growth on bamboo food packaging and its possible modes of action

52 Solvothermal method as a green chemistry solution for micro-encapsulation of phase change materials for high temperature thermal energy storage

53 Design and development of automated high temperature motor test facility

54 sp. nov., a nitrogen-fixing lineage isolated from nodules of the caesalpinioid species and characterized by tolerance to high temperature .

55 Optimization of flow field in slab continuous casting mold with medium width using high temperature measurement and numerical simulation for automobile exposed panel production

56 Sol–gel synthesis of highly TiO2 aerogel photocatalyst via high temperature supercritical drying

57 DNA Ligase Connects Two Fragments Having Exceptionally Short Complementary Termini at High Temperatures.

58 High Temperature Resistant Separator of PVDF-HFP/DBP/C-TiO for Lithium-Ion Batteries.

59 Effect of high temperature on the microstructural evolution of fiber reinforced geopolymer composite.

60 Fate of Chlorpropham during High Temperature Processing of Potatoes.

61 Effect of heat treatment on the precipitate behaviour, corrosion resistance and high temperature tensile properties of 7055 aluminum alloy synthesis by novel spray deposited followed by hot extrusion

62 Effect of heat treatment on the microstructure, mechanical property and tribological property of plasma-sprayed high temperature lubricating composite coating from nanostructured powder

63 Phase separation and thermal degradation of plastic bag waste modified bitumen during high temperature storage

64 Noncontact high sensitivity chipless tag microwave resonator for bitumen concentration measurement at high temperatures

65 3D Online Submicron Scale Observation of Mixed Metal Powder's Microstructure Evolution in High Temperature and Microwave Compound Fields

66 Corrigendum to “Computational analysis of the impact of a micro porous layer (MPL) on the characteristics of a high temperature PEMFC” (Electrochimica Acta (2020) 333, (S0013468619324247), (10.1016/j.electacta.2019.135552))

67 Electrical and carrier transport properties of Au/Pr<inf>6</inf>O<inf>11</inf>/n-GaN MIS structure with a high-k rare-earth oxide interlayer at high temperature range

68 Effect of storage at high temperature on chemical (composition) and techno-functional characteristics of E471 food emulsifiers applied to aerosol whipping cream

69 Microstructure Evolution and Mechanical Properties of 0.4C-Si-Mn-Cr Steel during High Temperature Deformation.

70 Design of a new Al-Cu alloy manipulated by in-situ nanocrystals with superior high temperature tensile properties and its constitutive equation

71 Effect of B-site cation ordering on high temperature thermoelectric behavior of BaxSr2-xTiFeO6 double perovskites.

72 Quantitative proteomic, physiological and biochemical analysis of cotyledon, embryo, leaf and pod reveals the effects of high temperature and humidity stress on seed vigor formation in soybean.

73 Impact of high temperatures in maize: Phenology and yield components

74 Ordinary Optical Fiber Sensor for Ultra-High Temperature Measurement Based on Infrared Radiation

75 Phase, Composition and Structure Changes of CoCrNi-Based Concentrated Alloys Resulting from High Temperature Oxidation

76 Fracture Resistance of 14Cr ODS Steel Exposed to a High Temperature Gas

77 Phase, Composition and Structure Changes of CoCrNi-Based Concentrated Alloys Resulting from High Temperature Oxidation

78 Investigation on thermoelectric properties of screen-printed La1-xSrxCrO3-In2O3 thermocouples for high temperature sensing

79 iTRAQ-based comparative proteomic analysis reveals high temperature accelerated leaf senescence of tobacco (Nicotiana tabacum L.) during flue-curing

80 A review on molten-salt-based and ionic-liquid-based nanofluids for medium-to-high temperature heat transfer

81 High temperature stable conjugated polyazomethines containing naphthalene moiety: Synthesis, characterization, optical, electrical and thermal properties

82 adaptabilidade e estabilidade produtiva de genótipos de tomateiro em condições de temperatura elevada adaptability and productive stability of tomato genotypes in high temperature

83 multi-stage control of waste heat recovery from high temperature slags based on time temperature transformation curves

84 compression strength and modulus of elasticity parallel to the grain of oak wood at ultra-low and high temperatures

85 capability study of ti, cr, w, ta and pt as seed layers for electrodeposited platinum films on γ-al2o3 for high temperature and harsh environment applications

86 phase behavior of nah2po4.h2o at high temperatures

87 synthesis and characterization of strontium titanate nanoparticles as potential high temperature oxygen sensor material

88 prediction of high temperature creep deformation and rupture life on hp heat resistant alloy using z<sub>c</sub> parameter

89 effects of wma additive on the rheological properties of asphalt binder and high temperature performance grade

90 phase evolution in an mcraly coating during high temperature exposure

91 characteristics of the dynamic recrystallization behavior of ti-45al-8.5nb-0.2w-0.2b-0.3y alloy during high temperature deformation

92 a nano-particle based approach to improve filtration control of water based muds under high pressure high temperature conditions

93 heterogeneous kinetics of vegetable oil transesterification at high temperature

94 effect of pre-oxidation on high temperature sulfidation behavior of fecr and fecral alloys

95 surface evolution of nano-textured 4h–sic homoepitaxial layers after high temperature treatments: morphology characterization and graphene growth

96 temperature and some blood traits response to organic and inorganic selenium added to the broiler diet reared at high temperatures

97 high temperature deformation behavior of 8090 al-li alloy

98 evaluation of steel element’s strength at high temperature (fire)

99 material behavior description for a large range of strain rates from low to high temperatures: application to high strength steel

100 physiological mechanisms of polychromatic polarized light influence at skin injuris by high temperature

101 effect of high temperature and type of cooling on some mechanical properties of cement mortar

Keyword Connections

Journals

Research Groups

Bibliographies