8 Corrigendum to “Microstructure and tensile properties of iron parts fabricated by selective laser melting”. (Optics and Laser Technology (2014) 56 (451–460), (S0030399213003423), (10.1016/j.optlastec.2013.09.017))

9 Prediction of mechanical behaviour of adhesively bonded CFRP scarf jointed specimen under tensile loading using localised DIC and CZM

10 3D FE analysis of tensile behavior for co-PP/SGF composite by considering interfacial debonding using CZM

11 Experiment Research of Concrete Splitting Tensile Strength Based on Age and Curing Temperature

12 Experimental Investigation on the Quasi-Static Tensile Capacity of Engineered Cementitious Composites Reinforced with Steel Grid and Fibers.

13 Dynamic evolution of texture and microstructure of AZ31 magnesium sheets during tensile-drawing bending

14 Prediction of lankford coefficients for AA1050 and AA5754 aluminum sheets using uniaxial tensile tests and cup drawing experiments

15 Failure Mechanisms and Reinforcing Modes of Ply Splice Fiber-Reinforced Composite Laminates under Tensile Load.

16 Tensile failure of fibre-metal-laminates made of titanium and carbon-fibre/epoxy laminates

17 Tensile behavior of on- and off-axis carbon fiber reinforced polymer composites incorporating steel wire mesh

18 Tensile and flexural behaviors of additively manufactured continuous carbon fiber-reinforced polymer composites

19 Effect of DMSO on wound healing: tensile strength measurements in rabbits.

20 Effect of DMSO on wound healing: tensile strength measurements in rabbits.

21 Corrigendum to “A strain-hardening cementitious composites with the tensile capacity up to 8%” (Construction and Building Materials (2017) 137 (410–419), (S0950061817300582), (10.1016/j.conbuildmat.2017.01.060))

22 Comparative evaluation of diametral tensile strength of phosphate-bonded investment (ringless) material by using air-drying method, conventional hot air oven, microwave oven, and combination of microwave and conventional oven: An study.

23 Comparative evaluation of diametral tensile strength of phosphate-bonded investment (ringless) material by using air-drying method, conventional hot air oven, microwave oven, and combination of microwave and conventional oven: An in vitro study

24 Exploring temporal and spatial variation in cotton tensile-strength loss to assess the ecosystem health of non-wadeable rivers

25 Evaluation of tensile shear strength for dissimilar spot welds of Al-Si-Mg aluminum alloy and galvanized steel by delta-spot welding process

26 Mechanical property modeling of photosensitive liquid resin in stereolithography additive manufacturing: Bridging degree of cure with tensile strength and hardness

27 Microstructure and elevated-temperature tensile properties of differential pressure sand cast Mg-4Y-3Nd-0.5Zr alloy

28 Effects of hair follicle stem cells on partial-thickness burn wound healing and tensile strength

29 Discrete element analysis of indirect tensile test based on image processing with annular segmentation and bimodal threshold

30 In-situ investigation of crack initiation and propagation in roll-bonded five-ply ASS/Al/Mg/Al/ASS laminated composites during tensile test

31 Influence of shrinkage porosity on fracture under tensile stress in ductile cast iron

32 Effect of heat treatment on the precipitate behaviour, corrosion resistance and high temperature tensile properties of 7055 aluminum alloy synthesis by novel spray deposited followed by hot extrusion

33 Dynamic Tensile Behavior of Steel HRB500E Reinforcing Bar at Low, Medium, and High Strain Rates.

34 Influence of Ti on the Tensile Properties of the High-Strength Powder Metallurgy High Entropy Alloys.

35 Phase Constitution and Tensile Properties of Semi-continuous Cast Mg-6Al-6Zn-3Sn-1Y-0.5Mn Alloy at Casting State and Heat Treatment State

36 Design of a new Al-Cu alloy manipulated by in-situ nanocrystals with superior high temperature tensile properties and its constitutive equation

37 Effect of multi source direct dye application and important process variables on the tensile strength (Warp Wise & Fill Wise) of the denim fabric

38 Combining tensile testing and microscopy to address a diverse range of questions.

39 UV-Cured Transparent Flexible Silicone Materials with High Tensile Strength.

40 Direct Observations of the Structural Properties of Semiconducting Polymer: Fullerene Blends under Tensile Stretching

41 Tensile fracture of soft and hard PZT

42 cracking and deformation modelling of tensile rc members using stress transfer approach / tempiamųjų gelžbetoninių elementų pleišėjimo ir deformacijų modeliavimas įtempių perdavimo algoritmu

43 tensile bond strength of hydroxyethyl methacrylate (hema) bonding agent to bovine dentine surface at various humidity

44 structural integrity assessment and stress measurement of chasnupp-1 fuel assembly skeleton: under tensile loading condition

45 desarrollo de un algoritmo computacional para la estimación de la tensión de cables en puentes atirantados con base en la medición experimental en laboratorio y campo de sus modos y frecuencias naturales de vibración development of an computational algorith for estimating cables'tensile stress on cable-stayed bridges based on experimental laboratory and job site measurements on their natural vibration modes and frequencies

46 effects of grain refinement on cast structure and tensile properties of superalloy k4169 at high pouring temperature

47 effect of nanofiller addition to an experimental dentin adhesive on microtensile bond strength to human dentin

48 a study of microstructure and tensile property with casting s45c welding

49 effect of sett and construction on uniaxial tensile

50 effect of carbamide peroxide-based bleaching agents containing fluoride or calcium on tensile strength of human enamel efeito de agentes clareadores à base de peróxido de carbamida contendo fluoreto e cálcio na resistência à tração do esmalte humano

51 preparo do solo em áreas de produção de grãos, silagem e pastejo: efeito na resistência tênsil e friabilidade de agregados soil tillage in grain and silage-producing areas and pasture: effect on tensile strength and aggregate friability

52 tensile strength of 3d textiles reinforced cementitious composites plates

53 residual tensile property of plain woven jute fiber/poly(lactic acid) green composites during thermal cycling

54 tensile properties of duplex uns s32205 and lean duplex uns s32304 steels and the influence of short duration 475 ºc aging

55 effect of post weld heat treatment on tensile properties and microstructure characteristics of friction stir welded armour grade aa7075-t651 aluminium alloy

56 off-axial tensile properties of precontraint pvdf coated polyester fabrics under different tensile rates

57 evaluation of simultaneous effect of melt filtration and cooling rate on tensile properties of a356 cast alloy

58 analysis of stainless steel clasp wire tensile strength and its effect after immersion on denture cleanser solution (a research)

59 influence of ultrasonic setting on compressive and diametral tensile strengths of glass ionomer cements

60 effects of mould and pouring temperatures on the ultimate tensile strength of aluminium alloy sand castings: an anova approach

61 alternate method for determination of glue-line tensile strength of spliced veneers in czech republic

62 tensile testing with cyclic strain holding to analyze dynamic recrystallization of pure lead

63 cyclic tensile strain enhances human mesenchymal stem cell smad 2/3 activation and tenogenic differentiation in anisotropic collagen-glycosaminoglycan scaffolds

64 fabrication, structural characterization and uniaxial tensile properties of novel sintered multi-layer wire mesh porous plates

65 cervical rotatory manipulation decreases uniaxial tensile properties of rabbit atherosclerotic internal carotid artery

66 solid burnt bricks’ tensile strength

67 the variable contact pressure influence on the tensile force in the process of strip sliding in the flat die in ironing

68 microstructure, material flow and tensile properties of a356 alloy thixoformed parts

69 influence of powder/liquid ratio on the radiodensity and diametral tensile strength of glass ionomer cements

70 effects of polypropylene fibre on the compressive and splitting tensile strength of concrete

71 the influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete

72 prediction of splitting tensile strength from cylinder compressive strength of concrete by support vector machine

73 self-monitoring application of conductive asphalt concrete under indirect tensile deformation

74 a testing technique to investigate the tensile behavior of propellant representative material

75 tensile and impact properties of three-component pp/wood/elastomer composites

76 evaluation of the effect of different stretching patterns on force decay and tensile properties of elastomeric ligatures

77 conversion of engineering stresses to cauchy stresses in tensile and compression tests of thermoplastic polymers

78 microstructure and tensile properties of friction stir processed mg–sn–zn alloy

79 performance of grouted splice sleeve connector under tensile load

80 tensile strength study of the abdominal wall following laparotomy synthesis using three types of surgical wires in wistar rats estudo da resistência tênsil da parede abdominal após síntese de laparotomia usando três tipos de fios cirúrgicos em ratos wistar

81 effect of thermal cycling on the tensile behavior of cf/al fiber metal laminates

82 mechanical characterization of the tensile properties of glass fiber and its reinforced polymer (gfrp) composite under varying strain rates and temperatures

83 tensile properties and hardness of two types of 11cr-ferritic/martensitic steel after aging up to 45,000 h

84 improving tensile and compressive properties of an extruded az91 rod by the combined use of torsion deformation and aging treatment

85 variation of tensile properties of single fibres of dendrocalamus farinosus bamboo

86 Tensile behaviors of layer-to-layer 2.5D angle-interlock woven composites with/without a center hole at various temperatures

87 Tensile properties of multilayer multiaxial interlock 3D woven composites

88 Tensile behavior of bio-inspired hierarchical suture joint with uniform fractal interlocking design.

89 Investigation of influence of tab types on tensile strength of E-glass/epoxy fiber reinforced composite materials

90 Splitting Tensile Strength of Cement Soil Reinforced with Basalt Fibers

91 Tensile Creep Properties of Cr-Si Alloys at 980 °C in Air—Influence of Ge and Mo Addition

92 Effect of Off-Axis Ply on Tensile Properties of [0/θ]ns Thin Ply Laminates by Experiments and Numerical Method

93 Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM

Keyword Connections

Journals

Research Groups

Bibliographies