A design method and an FPGA-based prototype implementation of massively parallel systolic-array VLSI architectures for 2nd-order and 3rd-order frequency-planar beam plane-wave filters are proposed. Frequency-planar beamforming enables highly-directional UWB RF beams at low computational complexity compared to digital phased-array feed techniques. The array factors of the proposed realizations are simulated and both high-directional selectivity and UWB performance are demonstrated. The proposed architectures operate using 2's complement finite precision digital arithmetic. The real-time throughput is maximized using look-ahead optimization applied locally to each processor in the proposed massively-parallel realization of the filter. From sensitivity theory, it is shown that 15 and 19-bit precision for filter coefficients results in better than 3% error for 2nd- and 3rd-order beam filters. Folding together with Ktimes multiplexing is applied to the proposed beam architectures such that throughput can be traded for K-fold lower complexity for realizing the 2-D fan filter banks. Prototype FPGA circuit implementations of these filters are proposed using a Virtex 6 xc6vsx475t-2ff1759 device. The FPGA-prototyped architectures are evaluated using area (A), critical path delay (T), and metrics AT and AT2. The L2 error energy is used as a metric for evaluating fixed-point noise levels and the accuracy of the finite precision digital arithmetic circuits.