During daily usage of textiles, humidity and warmth conditions provide appropriate living conditions for bacteria and microorganisms in textile products. Bacteria growth, infection and cross infection by pathogens might develop due to usage of textile products. Especially since World War II, antibacterial textile products have developed as a result of the hygiene demand of the society. In this study, triclosan (sample A), quaternary ammonium plus triclosan (sample B), dichlorophenol (sample C), silver (sample D), quaternary ammonium (sample E) and chitosan (sample F) based six different antibacterial additives were applied on 100% cotton fabrics for antibacterial treatment. All six treated fabrics and the untreated fabric (control sample) were washed for 40 cycles; the antibacterial efficacies were tested; changes in tear strength and Berger whiteness values of the samples were recorded prior to washing and after 1st, 5th, 10th, 20th and 40th washing cycles. Regarding all washing cycles, a decrease in tear strength results is observed between unwashed and 40 cycle washed samples. Textile materials such as bedlinen, pillow cases, surgeon gowns for which tear strength values are important and that have antibacterial treatments should be tested for tear strength values for different washing cycles to see if they meet minimum tear strength requirements. The change in tear strength and Berger whiteness of samples shows differences according to the antibacterial agent treated and washing cycle applied. Generally, slight decreases in tear strength values are observed. And slight decreases in whiteness, except for sample F which is treated with chitosan, are observed as well. Textile materials having antibacterial treatments should be tested for the special antibacterial agent they are treated and for the number of washing cycles that is required for their product life.