The benzene methylation with methane over zeolite catalysts was previously shown in our laboratory to require the presence of oxygen. Thus, a two-step mechanism involving the intermediate formation of methanol by partial oxidation of methane followed by the methylation of benzene with methanol in the second step, was postulated. This paper now reports the results of the characterisation of the zeolite catalysts used for the oxidative benzene methylation reaction in order to provide some information about their composition, structure, properties and their behaviour before and after the reaction. The catalysts were characterised by X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES), X-ray fluorescence (XRF), FT-IR and solid state NMR. XRD results indicate that the crystalline structures of all the ZSM-5 and H-beta catalysts remained unchanged after batch reaction of benzene with methane over the catalysts in agreement with the observation that the catalysts recovered from the reactor could be reused without loss of activity. Elemental analyses and FT-IR data show that as the level of metal ion exchange increases, the Brönsted acid concentration decreases but this metal ion exchange does not totally remove Brönsted acidity. FT-IR results further show that only a small amount of acid sites is actually necessary for a catalyst to be active since used catalysts containing highly reduced Brönsted acidity are found to be reusable without any loss of their activity. 29Si and 27Al magic angle spinning (MAS) NMR together with FT-IR spectra also show that all the active zeolites catalysts contain some extra-framework octahedral aluminium in addition to the normal tetrahedral framework aluminium. The presence of this extra-lattice aluminium does not, however, have any adverse effect on the crystallinity of the catalysts both before and after oxidative benzene methylation reaction. There appears also to be no significant dealumination of the zeolite catalysts during reaction since their catalytic performance was retained after use.