This study presents a numerical validation of a new approach to model single junction PV cell under non-uniform illumination for low-concentration solar collectors such as compound parabolic concentrators (CPC). The simulation is achieved by finite element modelling (FEM). To characterize the results, the model is simulated with five different non-uniform illumination profiles. The results indicate that increasing the non-uniformity of concentrated light will introduce more resistive losses and lead to a significant attenuation in the PV cell short-circuit current. The FEM modelling results are then used to validate the array modelling approach, in which a single junction PV cell is considered equivalent to a parallel-connected array of several cell splits. A comparison between the FEM and array modelling approaches shows good agreement. Therefore, the array modelling approach is a fast way to investigate the PV cell performance under non-uniform illumination, while the FEM approach is useful in optimizing design of fingers and bus-bars on a PV.