1 An attempt to make a reliable assessment of the wet steam flow field in the de Laval nozzle

2 Pin-fin metal alloy structures enhancing heat transfer in PCM-based heat storage units

3 Precise determination of LJ parameters and Eucken correction factors for a more accurate modeling of transport properties in gases

4 Soft and hard computation methods for estimation of the effective thermal conductivity of sands

5 Liquid-liquid two-phase flow patterns in ultra-shallow straight and serpentine microchannels

6 Modeling of thermal performance of multilayer protective clothing exposed to radiant heat

7 Heat and mass transfer boundary conditions at the surface of a heated sessile droplet

8 Comparing negative emissions and high renewable scenarios for the European power system

9 Dryout-type critical heat flux in vertical upward annular flow: effects of entrainment rate, initial entrained fraction and diameter

10 Experimental study of the internal flow in freezing water droplets on a cold surface

11 The influence of convection drying on the physicochemical properties of yacón ( Smallanthus sonchifolius )

12 Modelling heat transfer during flow through a random packed bed of spheres

13 Carbonate dual-phase improves the performance of single-layer fuel cell made from mixed ionic and semiconductor composite

14 Evaluation of latent heat storage in mortars containing microencapsulated paraffin waxes – a selection of optimal composition and binders

15 Thermal conductivity of sands

16 Recent advances in high-throughput mass spectrometry that accelerates enzyme engineering for biofuel research

17 Numerical modelling of effective thermal conductivity for modified geomaterial using lattice element method

18 Power converters for battery energy storage systems connected to medium voltage systems: a comprehensive review

19 Assessment of the naphthalene sublimation technique for determination of convective heat transfer in fundamental and industrial applications

20 Effective thermal conductivity of unsaturated granular geocomposite using lattice element method

21 BMC Energy : a home for all energy and fuels research

22 Effects of nanoscale zerovalent cobalt on growth and photosynthetic parameters of soybean Glycine max (L.) Merr. DT26 at different stages

23 Development and validation of a mathematical model to predict the thermal behaviour of nanofluids

24 Lattice element method for simulations of failure in bio-cemented sands

25 Experimental and numerical analysis of composite latent heat storage in cooling systems for power electronics

26 The effective thermal conductivity of double-reinforced composites

27 Development of apple chips technology

28 Discrete and continuous modelling of convective heat transport in a thin porous layer of mono sized spheres

29 Modelling the dynamics of the flow within freezing water droplets

30 Electrochemical study of TiO2 in aqueous AlCl3 electrolyte via vacuum impregnation for superior high-rate electrode performance

31 The influence of a porous, compliant layer with overlying discrete roughness elements as exhaust pipe wall on friction and heat transfer

32 Development of model for studies on momentum transfer in electrochemical cells with entry region coil as turbulence promoter

33 Shipping and the Paris climate agreement: a focus on committed emissions

34 Recent progress in the development of advanced biofuel 5-ethoxymethylfurfural

35 Influence of surface roughness on heat transfer during quenching hot metals with different nozzles

36 Flow boiling heat transfer characteristics using the modified eulerian and wall heat balance model

37 Hydrocyclone separation performance influenced by feeding solid concentration and correcting separation size

38 Innovative application of the moisture analyzer for determination of dry mass content of processed cheese

39 Numerical identification of the thermal properties of early age concrete using inverse heat transfer problem

40 A meshless procedure for analysis of fluid flow and heat transfer in an internally finned square duct

41 Modelling and optimization of a natural gas supply system at a transient stage: a case study of China

42 A review of the applications of fuel cells in microgrids: opportunities and challenges

43 Experimental and numerical study of pressure drop in pipes packed with large particles

44 Experimental investigation of heat transfer in pin-fins heat sinks for cooling applications

45 Optimization of energy storage and system flexibility in the context of the energy transition: Germany’s power grid as a case study

46 Enhanced economic feasibility of excess sludge treatment: acid fermentation with biogas production

47 Waste to bioenergy: a review on the recent conversion technologies

48 Bioenergy utilization for a low carbon future in the UK: the evaluation of some alternative scenarios and projections

49 Study of energy density of adsorption-based thermal energy storage system under different operating conditions for SAPO-34

50 Hydrogen and deuterium separation on metal organic frameworks based on Cu- and Zn-BTC: an experimental and theoretical study

51 Optimization of energy storage and system flexibility in the context of the energy transition: Germany’s power grid as a case study - BMC Energy

52 Experimental design of a “Snap-on” and standalone single-bed oxygen concentrator for medical applications - Adsorption

53 Soft and hard computation methods for estimation of the effective thermal conductivity of sands - Heat and Mass Transfer

54 Activity coefficient models for accurate prediction of adsorption azeotropes - Adsorption

55 The role of the dendritic growth model dimensionality in predicting the Columnar to Equiaxed Transition (CET) - Heat and Mass Transfer

56 Dr. Shivaji Sircar: the Air Products years (1973–2001) - Adsorption

57 7th European Thermal-Sciences Conference - Heat and Mass Transfer

58 Adsorption for efficient low carbon hydrogen production: part 1—adsorption equilibrium and breakthrough studies for H2/CO2/CH4 on zeolite 13X - Adsorption

59 Optimization of energy storage and system flexibility in the context of the energy transition: Germany’s power grid as a case study - BMC Energy

60 Pin-fin metal alloy structures enhancing heat transfer in PCM-based heat storage units - Heat and Mass Transfer

61 Soft and hard computation methods for estimation of the effective thermal conductivity of sands - Heat and Mass Transfer

62 Nitrogen rejection from landfill gas using Pressure Swing Adsorption - Adsorption

63 Prediction of affinity coefficient for estimation of VOC adsorption on activated carbon using V-matrix regression method - Adsorption

64 Adsorption for efficient low carbon hydrogen production: part 2—Cyclic experiments and model predictions - Adsorption

65 The role of the dendritic growth model dimensionality in predicting the Columnar to Equiaxed Transition (CET) - Heat and Mass Transfer

66 7th European Thermal-Sciences Conference - Heat and Mass Transfer

67 Connecting theory and simulation with experiment for the study of diffusion in nanoporous solids - Adsorption

68 Activity coefficient models for accurate prediction of adsorption azeotropes - Adsorption

69 Measurement and interpretation of unary supercritical gas adsorption isotherms in micro-mesoporous solids - Adsorption

70 Economic assessment of a natural gas upgrading process using pressure vacuum swing adsorption for nitrogen removal - Adsorption

71 High magnetic field impact on the natural convection behaviour of a magnetic fluid - Heat and Mass Transfer

Keyword Connections

Journals

Research Groups

Bibliographies