1 Chiral Mesoporous Silica Materials: A Review on Synthetic Strategies and Applications

2 Surface pH buffering to promote degradation of mesoporous silica nanoparticles under a physiological condition

3 In vitro and in vivo evaluation of degradation, toxicity, biodistribution, and clearance of silica nanoparticles as a function of size, porosity, density, and composition

4 Effect of bifunctional acid on the porosity improvement of biomass-derived activated carbon for methylene blue adsorption.

5 Chemical Composition and Porosity Characteristics of Various Calcium Silicate-Based Endodontic Cements

6 Combination of Solid-State and Electrochemical Impedance Spectroscopy To Explore Effects of Porosity in Sol-Gel-Derived BaTiO Thin Films.

7 Engineering of phosphate-functionalized biochars with highly developed surface area and porosity for efficient and selective extraction of uranium

8 Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting

9 Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burners

10 Twofold Porosity and Surface Functionalization Effect on Pt-Porous GaN for High-Performance H-Gas Sensors at Room Temperature.

11 Estimating porosity and hydraulic conductivity for hydrogeology on the basis of reservoir and elastic petrophysical parameters

12 Correction to: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application (Hydrogeology Journal, (2018), 26, 2, (381-393), 10.1007/s10040-017-1672-3)

13 Uncertainty analysis of metal-casting porosity measurements using Archimedes' principle

14 Border porosity and counterinsurgency in Nigeria

15 Mitigation of porosity defects in fiber laser welding under low vacuum

16 Effect of different drying techniques on density, porosity and bioactivity of β-wollastonite from local limestone and rice straw

17 Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds.

18 Reducing Shrinkage Porosity in High-Performance Steel Castings: Case of an ASME B16.34 Gate Valve Body: Part 2—Simulation and Experimental Verification

19 Three-dimensional cellular automaton simulation of coupled hydrogen porosity and microstructure during solidification of ternary aluminum alloys.

20 Shrinkage Porosity Control in Aluminum Alloy Cylinder Head Based on Casting Simulation Technology

21 Evaluation of porosity in Al alloy die castings

22 Effect of Flow State of Pure Aluminum and A380 Alloy on Porosity of High Pressure Die Castings.

23 High Pressure Die Casting Porosity Defect Analysis and Experimental Validation for Power Steering Columns and DVVTs

24 Effect of cooling rate on the porosity defect in the thick aluminum casting by 3D computed tomography analysis

25 Mechanisms and mechanics of porosity formation in ductile iron castings

26 Discussion on usability of the niyama criterion for porosity predicting in cast iron castings

27 Application of Niyama criterion in the shrinkage porosity prediction of metal mold gravity casting aluminum alloy motorcycle wheel

28 Applicability of shrinkage porosity prediction for casting with Niyama criterion

29 Discussion on Usability of the Niyama Criterion for Porosity Predicting in Cast Iron Castings

30 High porosity with tiny pore constrictions and unbending pathways characterize the 3D structure of intervessel pit membranes in angiosperm xylem.

31 Development of a porosity prediction model based on shrinkage velocity and glass transition temperature

32 Influence of Age Hardening on Mechanical Properties of Cast Nickel-Aluminum Bronze Containing Shrinkage Porosity

33 Technological Measures of Preventing Shrinkage Porosity in Jewelry Castings

34 Effect of pouring system on shrinkage porosity of TiAl alloy rod castings by centrifugal casting

35 Effect of Thermoelectric Magnetic Convection on Shrinkage Porosity at the Final Stage of Solidification of GCr18Mo Steel Under Axial Static Magnetic Field

36 Real-time X-ray Radiography and Computational Modeling of Shrinkage Porosity Formation in Aluminum Alloy Castings

37 Effect of Preconditioning and Inoculation on Graphite Nodule Count and Their Size Distribution in Spheroidal Graphite (SG) Cast Iron: A Study to Minimise Rejection of Castings Due to Shrinkage Porosity

38 Minimization of shrinkage porosity in HPDC process with local squeeze pin using flow simulation

39 Characterization of microstructure and shrinkage porosity of a semi-solid metal slurry in gravity die casting

40 Evolution of shrinkage, real density, porosity, heat and mass transfer coefficients during indirect solar drying of cocoa beans

41 Optimization of Permanent Mold Casting Processes for Shrinkage Porosity Reduction in Cu-45Ag Alloy by Simulation and Taguchi Method

42 Reducing Shrinkage Porosity in High-Performance Steel Castings: Case of an ASME B16.34 Gate Valve Body: Part 1—Analysis, Techniques and Experimental Approach

43 Suppression of shrinkage porosity in laser-joining of CFRP and steel using a laser surface modification process “Surfi-Sculpt ®”

44 Shrinkage Porosity in Die Casting Components

45 Control countermeasures of center porosity and shrinkage in 45 steel continuous casting bloom

46 A method based on semi-solid forming for eliminating coarse dendrites and shrinkage porosity of H13 tool steel

47 Determination of porosity from shrinkage curves during sintering of granular materials

48 Shrinkage porosity formation in cast iron components

49 Influence of shrinkage porosity on fracture under tensile stress in ductile cast iron

50 The role of biochar porosity and surface functionality in augmenting hydrologic properties of a sandy soil.

51 Ultrasonic Nondestructive Evaluation of Porosity Size and Location of Spot Welding Based on Wavelet Packet Analysis

52 Effects of non-uniform porosity on thermochemical performance of solar driven methane reforming

53 A theoretical analysis of Biorheological fluid flowing through a complex wavy convergent channel under porosity and electro-magneto-hydrodynamics Effects.

54 Mechanical properties of illite‐based ceramics with controlled porosity studied by modern in situ techniques

55 fabrication of slag-glass composite with controlled porosity

56 effect of porosity and concentration polarization on electrolyte diffusive transport parameters through ceramic membranes with similar nanopore size

57 separation of the inter- and intra-particle porosity in images of powder compacts

58 fabrication and mechanical characterisation of titanium lattices with graded porosity

59 analysis of different statistical models in probabilistic joint estimation of porosity and litho-fluid facies from acoustic impedance values

60 plasma sintering of unalloyed iron: a study of surface porosity

61 destruction of ferromagnetig material particles in magnetovibrating layer with high porosity

62 the effect of commercial rice husk ash additives on the porosity, mechanical properties, and microstructure of alumina ceramics

63 low calcium intake is related to cortical porosity in women over 80 years of age

64 sost deficiency does not alter bone’s lacunar or vascular porosity in mice

65 comparison of porosity assessment techniques for low-cost ceramic membranes

66 the effect of volume variation of silver nanoparticle solution towards the porosity and compressive strength of mortar

67 influence of thermal barrier type ceramic layer’s chemical composition and quick thermal schock on their porosity and adherence

68 experimental study on mechanical properties and porosity of organic microcapsules based self-healing cementitious composite

69 co2 and co3 mixed cluster secondary building unit approach toward a three-dimensional metal-organic framework with permanent porosity

70 homogenization of immiscible compressible two-phase flow in double porosity media

71 influence of treated sediment substitution percentage on workability, strength and porosity of scc

72 correlação linear e espacial entre produtividade de brachiaria brizantha, densidade do solo e porosidade total em função do sistema de manejo do solo linear and spatial correlations among forage yield, bulk density and total porosity in function of soil management system

73 correlation between porosity and electrical-mechanical properties of carbon nanotube buckypaper with various porosities

74 study of the influence of agricultural waste on the porosity of clay brick

75 production of a porosity map by kriging in sandstone reservoirs, case study from the sava depression

Keyword Connections

Journals

Research Groups

Bibliographies