1 A COMPUTATIONALLY EFFICIENT ENERGY MANAGEMENT STRATEGY FOR A PLUG-IN FUEL-CELL HYBRID ELECTRIC VEHICLE COMPOSED OF A MULTI-INPUT CONVERTER

2 Sodium ion capacitors: materials, mechanism and challenges.

3 Effect of Sugars on the Real-Time Adsorption of Expansin on Cellulose.

4 Oxygen-Vacancy-Enhanced Peroxidase-like Activity of Reduced CoO Nanocomposites for the Colorimetric Detection of HO and Glucose.

5 Heteronuclear Iron(III)-Schiff Base Complexes with the Hexacyanidocobaltate(III) Anion: On the Quest To Understand the Governing Factors of Spin Crossover.

6 polymethylmethacrylate/polyacrylonitrile membranes via centrifugal spinning as separator in li-ion batteries

7 energy management system optimization for battery-ultracapacitor powered electric vehicle

8 the possibility of increasing the antioxidant activity of celery root during osmotic treatment

9 a four-phase high voltage conversion ratio bidirectional dc-dc converter for battery applications

10 dynamic economic dispatch pada sistem kelistrikan microgrid dengan penambahan media penyimpan energi menggunakan quadratic programming

11 optimization of hybrid energy storage systems at the building level with combined heat and power generation

12 exploring water level sensitivity for metropolitan new york during sandy (2012) using ensemble storm surge simulations

13 evisceration caused by the explosion of mobile phone battery: a rare form of domestic accident in a child

14 a review on battery charging and discharging control strategies: application to renewable energy systems

15 dynamic control modeling and simulation of a upfc–smes compensator in power systems

16 Harnessing self-heating in nanowires for energy efficient, fully autonomous and ultra-fast gas sensors

17 Calculation of Capacity and Usage Time of Lithium-Ion Batteries on Electric Bikes with 350 W BLDC Motors

18 Ability of the Short Physical Performance Battery Frailty Index to Predict Mortality and Hospital Readmission in Patients with Liver Cirrhosis

19 Effect of Current Rate and Prior Cycling on the Coulombic Efficiency of a Lithium-Ion Battery

20 Optimal operation of Distributed Network embedded to wind – Battery storage system for revenue enhancement

21 A Review on Optimal Operation of Distributed Network Embedded to Wind-Battery Storage System

22 Customer economics of residential PV–battery systems in Thailand

23 Co<inf>3</inf>O<inf>4</inf> modified Ag/g-C<inf>3</inf>N<inf>4</inf> composite as a bifunctional cathode for lithium-oxygen battery

24 The Li-ion rechargeable battery: a perspective.

25 A novel estimation method for the state of health of lithium-ion battery using prior knowledge-based neural network and markov chain

26 Portable Battery Power and Small-Reservoir Modifications For Pesticide Misting Systems.

27 Comparative analysis of toxicity reduction of wastewater in twelve industrial park wastewater treatment plants based on battery of toxicity assays

28 Assessment of Eight Entrepreneurial Personality Dimensions: Validity Evidence of the BEPE Battery.

29 Reliability assessments of an islanded hybrid PV-diesel-battery system for a typical rural community in Nigeria.

30 MPC based control strategy for battery energy storage station in a grid with high photovoltaic power penetration

31 Reference values for fatigued versus non-fatigued limb symmetry index measured by a newly designed single-leg hop test battery in healthy subjects: a pilot study.

32 Distributed TABC based bi-directional converter for cell/sub-modular level battery energy storage system

33 Temperament assessment battery for children (TABC)

34 Lithium-ion battery models: a comparative study and a model-based powerline communication

35 Diagnosis of a battery energy storage system based on principal component analysis

36 Energy management system for hybrid PV-wind-battery microgrid using convex programming, model predictive and rolling horizon predictive control with experimental validation

37 Assessment of primary frequency control through battery energy storage systems

38 Battery energy storage sizing based on a model predictive control strategy with operational constraints to smooth the wind power

39 A Back-End Method Realizing the Ergonomic Advantage of Modularized Battery Systems: ICT Equipment, Electric Vehicles and Beyond

40 In situ coupled amorphous cobalt nitride with nitrogen-doped graphene aerogel as a trifunctional electrocatalyst towards Zn-air battery deriven full water splitting

41 Facile preparation of sulfur/nitrogen co-doped graphene coupled with Ni(OH)<inf>2</inf> for battery-type electrode with superior electrochemical performance

42 CoMn2O4 nanoparticles anchored on nitrogen-doped graphene nanosheets as bifunctional electrocatalyst for rechargeable zinc–air battery

43 An IPT Battery Charger with Near Unity Power Factor and Load-Independent Constant Output Combating Design Constraints of Input Voltage and Transformer Parameters

44 Design and test of a new two-stage control scheme for SMES-battery hybrid energy storage systems for microgrid applications

45 System design of underwater battery power system for marine and offshore industry

46 In Situ Synthesis of Silicon-Carbon Composites and Application as Lithium-Ion Battery Anode Materials.

47 Flower-Like MoSe/MoO Composite with High Capacity and Long-Term Stability for Lithium-Ion Battery.

48 The role of functional materials to produce high areal capacity lithium sulfur battery

49 Lithium-ion battery pack equalization based on charging voltage curves

50 Optimized charging of lithium-ion battery for electric vehicles: Adaptive multistage constant current–constant voltage charging strategy

51 Design of multishell microsphere of transition metal oxides/carbon composites for lithium ion battery

52 Josh's Battery – a more even relationship with the grid★

53 Surface Charge Modulation of Perovskite Oxides at the Crystalline Junction with Layered Double Hydroxide for a Durable Rechargeable Zinc-Air Battery.

54 Stand-Alone Battery Thermal Management for Fast Charging of Electric Two Wheelers—Integrated Busbar Cooling

55 Diagnostic value of digital clock drawing test in comparison with CERAD neuropsychological battery total score for discrimination of patients in the early course of Alzheimer’s disease from healthy individuals

56 Synergistic Role of Electrolyte and Binder for Enhanced Electrochemical Storage for Sodium-Ion Battery

57 Tailoring Low Temperature Performance of Lithium-ion Battery via Rational Designing Interphase on Anode.

58 Fe3SnC@CNF: A 3D Antiperovskite Intermetallic Carbide System as a New Robust High Capacity Li-ion Battery Anode.

59 Sulfur-Grafted Hollow Carbon Spheres for Potassium-Ion Battery Anodes.

60 Hydrothermal Coating of Patterned Carbon Nanotube Forest for Structured Lithium-Ion Battery Electrodes.

61 The Work Disability Functional Assessment Battery (WD-FAB).

62 The effect of heterogeneous electric vehicles with different battery capacities in parking lots on peak load of electric power distribution networks

63 Largely Improved Battery Performance Using a Microsized Silicon Skeleton Caged by Polypyrrole as Anode.

64 Can product bundling increase the joint adoption of electric vehicles, solar panels and battery storage? Explorative evidence from a choice-based conjoint study in Austria

65 Finding Global-Optimal Gearbox Designs for Battery Electric Vehicles

66 Energy Management Strategy for Micro-Grids with PV-Battery Systems and Electric Vehicles

67 Template-free synthesis of metallic WS hollow microspheres as an anode for the sodium-ion battery.

68 Large-scale synthesis of Ni(OH)/peach gum derived carbon nanosheet composites with high energy and power density for battery-type supercapacitor.

69 NIH Toolbox Cognition Battery in Young and Older Adults: Reliability and Relationship to Adiposity and Physical Activity.

70 Detailed Li-ion battery characterization model for economic operation

71 Research on Automatic Matching Model of Power Battery

72 Preparing a composite including SnS<inf>2</inf>, carbon nanotubes and S and using as cathode material of lithium-sulfur battery

73 Dendrite-Free Zinc Deposition Induced by Tin-Modified Multifunctional 3D Host for Stable Zinc-Based Flow Battery.

74 The adoption of Internet of Things in a Circular Supply Chain framework for the recovery of WEEE: The case of Lithium-ion electric vehicle battery packs.

75 The adoption of Internet of Things in a Circular Supply Chain framework for the recovery of WEEE: The case of Lithium-ion electric vehicle battery packs

76 Thermal and chemical burns caused by e-cigarette battery explosions.

77 Hybrid thermal management of a Li-ion battery module with phase change material and cooling water pipes: An experimental investigation

78 A novel heat pipe assisted separation type battery thermal management system based on phase change material

79 Comparative study of GaN betavoltaic battery based on p-n junction and Schottky barrier diode

80 [Impact of Newly Build Lead-Acid Battery Agglomeration Area on the Surrounding Soil Environment: A Study Based on the Spatial Characteristics of Heavy Metals].

81 Electrophoretic Deposition for Lithium-Ion Battery Electrode Manufacture.

82 Microwave-absorbing properties of cathode material during reduction roasting for spent lithium-ion battery recycling

83 Atomic layer deposition (ALD) of lithium fluoride (LiF) protective film on Li-ion battery LiMn<inf>1.5</inf>Ni<inf>0.5</inf>O<inf>4</inf> cathode powder material

84 Electrochemical properties of pre-lithiated nanorod-like Li<inf>x</inf>V<inf>6</inf>O<inf>13</inf> lithium ion battery cathode materials prepared by solvothermal method

85 LiCoO<inf>2</inf>@LiNi<inf>0.45</inf>Al<inf>0.05</inf>Mn<inf>0.5</inf>O<inf>2</inf> as high-voltage lithium-ion battery cathode materials with improved cycling performance and thermal stability

86 Large-Scale Modification of Commercial Copper Foil with Lithiophilic Metal Layer for Li Metal Battery.

87 Multi-objective energy management in microgrids with hybrid energy sources and battery energy storage systems

88 Lithium-Battery Anode Gains Additional Functionality for Neuromorphic Computing through Metal-Insulator Phase Separation.

89 Experimental and simulation study on thermal characteristics of 18,650 lithium–iron–phosphate battery with and without spot–welding tabs

90 Short Physical Performance Battery: What Does Each Sub-Test Measure in Patients with Chronic Obstructive Pulmonary Disease?

91 WISC-IV profile in Developmental Dyscalculia and relationship between WISC-IV and Battery for Developmental Dyscalculia (BDE) in a clinical sample of children with learning difficulties of specific learning disabilities

92 Sustainable business model archetypes for the electric vehicle battery second use industry: Towards a conceptual framework

93 Recycling spent lithium-ion battery as adsorbents to remove aqueous heavy metals: Adsorption kinetics, isotherms, and regeneration assessment

94 Industrial Policy: Battery Cells from Europe?

95 An adaptive sigma-point Kalman filter with state equality constraints for online state-of-charge estimation of a Li(NiMnCo)O<inf>2</inf>/Carbon battery using a reduced-order electrochemical model

96 Magnetic supramolecular polymer: Ultrahigh and highly selective Pb(II) capture from aqueous solution and battery wastewater.

97 Validity and reliability of the Neuropsychological Assessment Battery - Screening Module (S-NAB) in a subset of Malaysian population with mild traumatic brain injury (mTBI).

98 Annealing effects of TiO<inf>2</inf> coating on cycling performance of Ni-rich cathode material LiNi<inf>0.8</inf>Co<inf>0.1</inf>Mn<inf>0.1</inf>O<inf>2</inf> for lithium-ion battery

99 A 1.02 μW Battery-Less, Continuous Sensing and Post-Processing SiP for Wearable Applications.

100 A Bioinspired Functionalization of Polypropylene Separator for Lithium-Sulfur Battery.

101 A Stimulus-Responsive Zinc-Iodine Battery with Smart Overcharge Self-Protection Function.

Keyword Connections

Journals

Research Groups

Bibliographies