1 Determination of the temperature distribution in a rectangular cooling fin using the finite element method

2 Experimental study on thermal properties and electrical conductivity of stabilized HO-solar glycol mixture based multi-walled carbon nanotube nanofluids: developing a new correlation.

3 Nine-hour X-ray quasi-periodic eruptions from a low-mass black hole galactic nucleus.

4 Double-sided and omnidirectional absorption of visible light in tapered dielectric nanostructure coated with non-noble metal.

5 Broadband near-infrared TiO dielectric metamaterial absorbers.

6 Example of metal-multi-dielectric-metal cooling metamaterial use in engineering thermal radiation.

7 study on diesel cylinder-head cooling using nanofluid coolant with jet impingement

8 experimental and empirical technique to estimate energy decreasing at heating in an oval furnace

9 modeling and simulation of an anode carbon baking furnace

10 review of design and modeling of regenerative heat exchangers

11 transient free convection flow past an accelerated vertical cylinder in a rotating fluid

12 asymptotic solution for large prandtl number for the flow of a power-law fluid through a porous medium over a rotating disk with heat transfer and viscous dissipation

13 numerical study on film cooling mechanism and characteristics of cylindrical holes with branched jet injections

14 peristaltic transport of mhd flow and heat transfer in an asymmetric channel: effects of variable viscosity, velocity-slip and temperature jump

15 new integral transforms for solving a steady heat transfer problem

16 periodic unsteady flow aerodynamics and heat transfer: studies on a curved surface, combined part i and ii

17 horizontal earth-air heat exchanger for preheating external air in the mechanical ventilation system

18 an approach to obtain the heat transfer coefficient of aqueous sucrose solutions in agitated boiling vessels

19 Relations between Electron Yield and Temperature Rise under Low-energy Electron Irradiation for Au Element.

20 Stimulated Raman scattering by intracavity mixing of nanosecond laser excitation and fluorescence in acoustically levitated droplets.

21 a new iteration algorithm for solving the diffusion problem in non-differentiable heat transfer

22 contemporary challenges for thermal and mass transport technologies: a perspective on 21st century opportunities for the field

23 numerical study of the dynamic response of heat and mass transfer to operation mode switching of a unitized regenerative fuel cell

24 numerical simulation of turbulent fluid flow and heat transfer in a ribbed rotating two-pass square duct

25 general exact solution of the fin problem with variable thermal conductivity

26 comparaison d'un modèle empirique et d'un modèle physique de séchage de grains de maïs en lit fluidisé

27 a new integral transform method for solving steady heat-transfer problem

28 thermal and electrical analysis of solid aluminium capacitors

29 analisis numerik pengaruh pitch ratio longitudinal (sl/2a) dan transversal (st/2b) 1, 1.25, dan 1.5 terhadap karakteristik aliran fluida dan perpindahan panas melintasi staggered elliptical tube banks

30 numerical investigation on the convective heat transfer in a spiral coil with radiant heating

31 series solutions for the flow in the vicinity of the equator of an mhd boundary-layer over a porous rotating sphere with heat transfer

32 effects of rotation on mhd flow past an accelerated isothermal vertical plate with heat and mass diffusion

33 subcooled flow boiling heat transfer of ethanol aqueous solutions in vertical annulus space

34 the entropic potential concept: a new way to look at energy transfer operations

35 experimental investigations of the in-die quenching efficiency and die surface temperature of hot stamping aluminium alloys

36 heat transfer enhancement in tubular heat exchanger with double v-ribbed twisted-tapes

37 Numerical simulation of wire-coating low-density polyethylene: Theory and experiments

38 Hydrodynamic Modelling of Municipal Solid Waste Residues in a Pilot Scale Fluidized Bed Reactor

39 Natural Convection in Vertical Annuli: A Numerical Study for Constant Heat Flux on the Inner Wall

40 Description, calibration, and preliminary testing of the coal liquefaction heat transfer coefficient measurement test unit

41 Fast pyrolysis of biomass in a spouted bed reactor: Hydrodynamics, heat transfer and chemical reaction

42 Bowen ratio method for measuring heat transfer on land cover change in establishing green patch in urban heat Island of Bangkok

43 Experimentally measured effects of height and location of the vortex generator on flow and heat transfer characteristics of the flat-plate film cooling

44 An Experimental Investigation of Adiabatic Film Cooling Effectiveness and Heat Transfer Coefficient on a Transonic Squealer Tip

45 Direct numerical simulation capability for strongly-coupled fluid-solid heat transfer in film-cooling structures

46 Application of Multivariate Adaptive Regression Spline-Assisted Objective Function on Optimization of Heat Transfer Rate Around a Cylinder

47 Twente mass and heat transfer water tunnel: Temperature controlled turbulent multiphase channel flow with heat and mass transfer.

48 Review of low-GWP refrigerant pool boiling heat transfer on enhanced surfaces.

49 Effect of mesh wick geometry on the maximum heat transfer rate of flat-micro heat pipes with multi-heat sources and sinks.

50 Electric fields, additives and simultaneous heat and mass transfer in heat transfer enhancement

51 Low-temperature heat utilization with vapor pressure-driven osmosis: Impact of membrane properties on mass and heat transfer

52 Modelling mass and heat transfers of Permeate Gap Membrane Distillation using hollow fibre membrane

53 Impact of melting heat transfer and nonlinear radiative heat flux mechanisms for the generalized Burgers fluids

54 Effect of sonication characteristics on stability, thermophysical properties, and heat transfer of nanofluids: A comprehensive review.

55 Experimental research on subcooled boiling heat transfer for natural circulation flow in a vertical 3 × 3 rod bundle

56 Three dimensional numerical simulation of combustion and heat transfer in porous radiant burners

57 Numerical prediction of radiative heat transfer in reciprocating superadiabatic combustion in porous media.

58 Modulation of heat transfer for extended flame stabilization in porous media burners via topology gradation

59 Thermophysical and Forced Convection Studies on (Alumina + Menthol)-Based Deep Eutectic Solvents for Their Use as a Heat Transfer Fluid.

60 Heat transfer and pressure drop investigation of graphene nanoplatelet-water and titanium dioxide-water nanofluids in a horizontal tube

61 Experimental study of heat transfer performance of compact wavy channel with nanofluids as the coolant medium: Real time non-intrusive measurements

62 Experimental study on the heat transfer performance and friction factor characteristics of Co<inf>3</inf>O<inf>4</inf> and Al<inf>2</inf>O<inf>3</inf> based H<inf>2</inf>O/(CH<inf>2</inf>OH)<inf>2</inf> nanofluids in a vehicle engine radiator

63 Enhancement of heat transfer rate of solar energy via rotating Jeffrey nanofluids using Caputo–Fabrizio fractional operator: An application to solar energy

64 Rotation and migration of nanoparticles for heat transfer augmentation in nanofluids by molecular dynamics simulation

65 Heat Transfer and Mass Diffusion in Nanofluids over a Moving Permeable Convective Surface

66 Three-dimensional free convective flow of a second-grade fluid through a porous medium with periodic permeability and heat transfer

67 Numerical simulation of time fractional dual-phase-lag model of heat transfer within skin tissue during thermal therapy.

68 Experiment Research on Effect of Spacer Grid on Heat Transfer in Rod Bundle

69 Heat transfer coefficient for flow boiling in an annular mini gap

70 Heat transfer and storage performance of steam methane reforming in tubular reactor with focused solar simulator

71 THERMAL COMFORT AND HEAT TRANSFER

72 Effect of square dimples on the temperature distribution and heat transfer coefficient of an NACA0012 airfoil

73 A Simple Approach for Heat Transfer Enhancement of Carbon Nanofluids in Aqueous Media.

74 CFD study of heat transfer and fluid flow in a parabolic trough solar receiver with internal annular porous structure and synthetic oil–Al<inf>2</inf>O<inf>3</inf> nanofluid

75 Heat transfer analyses using computational fluid dynamics in the air blast freezing of guava pulp in large containers

76 Experimental Measurements and Numerical Computation of Nano Heat Transfer Enhancement Inside a Porous Material

77 Effect of carotid artery stenosis on neck skin tissue heat transfer

78 Pulsatile flow and heat transfer of blood in an overlapping vibrating atherosclerotic artery: A numerical study

79 Experimental investigation on convection heat transfer characteristics of ferrofluid in a horizontal channel under a non-uniform magnetic field

80 Mathematical analysis and numerical resolution of a heat transfer problem arising in water recirculation

81 Effect of SiO<inf>2</inf> nanoparticles on the heat transfer characteristics of refrigerant and tribological behaviour of lubricant

82 Application of nano-refrigerant for boiling heat transfer enhancement employing an experimental study

83 Selection of heat transfer fluids for solar thermal applications using multi-criteria decision-making tools

84 Near-field radiative heat transfer in multilayered graphene system considering equilibrium temperature distribution.

85 CFD and thermal-hydraulics analyses of liquid sodium heat transfer in 19-rod hexagonal bundles with scalloped walls

86 Simulation of heat transfer in the progress of precision glass molding with a finite element method for chalcogenide glass.

87 Calculation of transient phase change heat transfer through building envelopes: An improved enthalpy model and error analysis

88 An engineering approach to design a non-centrifugal cane sugar production module: A heat transfer study to improve the energy use

89 The impact of the casting thickness on the interfacial heat transfer and solidification of the casting during permanent mold casting of an A356 alloy

90 Correction to: Comparison of Uniform and Non-uniform Water Flux Density Approaches Applied on a Mathematical Model of Heat Transfer and Solidification for a Continuous Casting of Round Billets (Metallurgical and Materials Transactions B, (2015), 46, 1, (366-377), 10.1007/s11663-014-0200-2)

91 Implementation of a standard stream-upwind stabilization scheme in the element-free Galerkin based solution of advection-dominated heat transfer problems during solidification in direct chill casting processes

92 Influence of the Pressure of Open-Close Water-Cooled Moulds on Casting/Mould Interface Heat Transfer and Casting Solidification Process

93 Online Modelling of Heat Transfer, Solidification and Microstructure in Continuous Casting of Steel

94 Numerical simulation of nanofluid flow and heat transfer in a microchannel: The effect of changing the injection layout arrangement

95 Heat transfer enhancement in flow boiling using environmentally safe additives

96 Assessment of reduced-order modeling strategies for convective heat transfer

97 Analysis of Heat Transfer in a 35 mm Barrel of an Anti-Aircraft Cannon

98 Enhancement of heat transfer rate of solar energy via rotating Jeffrey nanofluids using CaputoâFabrizio fractional operator: An application to solar energy

99 Optimal Mass Diffusion Transfer in Solids Using Heat Transfer Similarities

100 Review on the recent development of corona wind and its application in heat transfer enhancement

101 Convective heat transfer in a measurement cell for scanning electrochemical microscopy.

Keyword Connections

Journals

Research Groups

Bibliographies