6 Study of the effect of aggregate geometry characteristics on the rheology of asphalt mortar using newly developed material rheological property test analyzer and aggregate image measurement system

7 Compressive strength, pore structure and chloride transport properties of alkali-activated slag/fly ash mortars

8 An Experimental Study of Mortars with Recycled Ceramic Aggregates: Deduction and Prediction of the Stress-Strain

9 Compressive and Flexural Strengths of EVA-Modified Mortars for 3D Additive Construction.

10 The Utilization of Recycled Masonry Aggregate and Recycled EPS for Concrete Blocks for Mortarless Masonry.

11 Drying response of lime-mortar joints in granite masonry after an intense rainfall and after repointing

12 Effect of elevated temperature on eggshell, eggshell powder and eggshell powder mortars for masonry applications

13 Properties of lime-metakolin mortars for the restoration of historic masonries

14 ThE EFFECT OF METAKOLIN, MICROSILICA AND NANOSILICA ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CEMENT MORTAR

15 Improvement on the mechanical properties of CA mortar and concrete composite specimens in high-speed railway by modification of interlayer bonding

16 Influence of Titanium Dioxide Nanoparticles on the Sulfate Attack upon Ordinary Portland Cement and Slag-Blended Mortars

17 Evaluation of Slag Reaction Efficiency in Slag-Cement Mortars under Different Curing Temperature.

18 Effects of Rubber Size on the Cracking Resistance of Rubberized Mortars.

19 Low velocity impact behavior of AR-glass textile reinforced mortar under varying range of loading and temperatures

20 Thermal storage and thermal management properties of a novel ventilated mortar block integrated with phase change material for floor heating: an experimental study

21 Diagonal shear behavior of historic walls strengthened with composite reinforced mortar (CRM)

22 Investigation of the crack healing performance in mortar using microbially induced calcium carbonate precipitation (MICP) method

23 Monitoring the Whole Cycle Length Change of Cement Mortar Incorporated with SRA by CMOS Image Sensor.

24 Strain field distribution of asphalt mortar using digital image processing

25 Insights into surface crack propagation of cement mortar with different cement fineness subjected to freezing/thawing

26 Production of Lightweight Alkali Activated Mortars Using Mineral Wools.

27 Effects of glass powder as a supplementary cementitious material on the performance of high strength mortars

28 Evaluation of the Self-Healing Ability of Mortar Mixtures Containing Superabsorbent Polymers and Nanosilica.

29 Corrosion Monitoring of Reinforced Steel Embedded in Cement Mortar under Wet-And-Dry Cycles by Electrochemical Impedance Spectroscopy.

30 Strength and shrinkage properties of heat-cured fly ash-based geopolymer mortars containing fine recycled concrete aggregate

31 Feasibility and corrosion inhibition efficacy of zeolite-supported lauric acid imidazoline as corrosion inhibitor in cementitious mortar

32 Evaluation of latent heat storage in mortars containing microencapsulated paraffin waxes – a selection of optimal composition and binders

33 Service Life and Early Age Durability Enhancement due to Combined Metakaolin and Nanosilica in Mortars for Marine Applications

34 inhibition of cracks on the surface of cement mortar using estabragh fibers

35 sem analysis of the interfacial transition zone between cement-glass powder paste and aggregate of mortar under microwave curing

36 improvement of adhesion performance of mortar-repair interface with inducing crack path into repair

37 performance of fly ash based geopolymer mortars in sulphate solution

38 internal hydrophobization of cement mortar by addition of siloxanes

39 the transformation of waste bakelite to replace natural fine aggregate in cement mortar

40 effect of gum arabic karroo as a water-reducing admixture in cement mortar

41 combined effects of non-conforming fly ash and recycled masonry aggregates on mortar properties

42 effect of high temperature and type of cooling on some mechanical properties of cement mortar

43 characterization of mechanical and bactericidal properties of cement mortars containing waste glass aggregate and nanomaterials

44 freeze-thaw and fire resistance of geopolymer mortar based on natural and waste pozzolans

45 acoustic behavior of subfloor lightweight mortars containing micronized poly (ethylene vinyl acetate) (eva)

46 the analysis of methodologies for testing compressive strength in masonry mortar joints / mūro skiedinio gulsčiojoje siūlėje gniuždomojo stiprio tyrimų metodų analizė

47 design of inorganic polymer mortar from ferricalsialic and calsialic slags for indoor humidity control

48 influence of pb dosage on immobilization characteristics of different types of alkali-activated mixtures and mortars

49 laboratory evaluation on performance of glass fiber reinforced plastic mortar pipe culverts

50 strength and ductility of reinforced concrete t-beams strengthened in the negative moment region with wire rope and mortar composite

51 microstructural properties of cement paste and mortar modified by low cost nanoplatelets sourced from natural materials

52 study of effect of electric arc furnace slag on expansion of mortars subjected to alkali-aggregate reaction

53 Valorisation of soil contaminated by petroleum hydrocarbons and toxic metals in geopolymer mortar formation

54 Fly ash geopolymer mortar: Impact of the substitution of river sand by copper slag as a fine aggregate on its thermal resistance properties

55 Rheological behavior of geopolymer mortar with fly ash, slag and their blending

56 Valorisation of soil contaminated by petroleum hydrocarbons and toxic metals in geopolymer mortar formation.

57 Analysis of Changes in the Microstructure of Geopolymer Mortar after Exposure to High Temperatures.

58 Analytical Chemistry Methods of Estimating the Hydraulic Lime Characteristics of Mortars from a Spanish Colonial Period Fortification in the Philippines: Perspective of a Southeast Asian Country | Mga Pamamaraan ng Suriing Kapnayan sa Pagtantya ng Katangiang Haydroliko ng Apog sa Argamasa na Mula sa Isang Panahon ng Kastilang Kuta sa Pilipinas: Pananaw ng Isang Bansa sa Timog-Silangang Asya

59 A Study of Repair Mortars for Restoration of Wall Painted Plasters in a Hypogeum Rock-Cut Church of Matera (Southern Italy).

60 Rheological and the Fresh State Properties of Alkali-Activated Mortars by Blast Furnace Slag

Keyword Connections

Journals

Research Groups

Bibliographies