1 Search for 2νββ Decay of [sup 130]Te to the First Excited State of [sup 130]Xe with an Ultra-Low-Background Germanium Crystal Array

2 fluidic control of molten metal flow

3 reflection of the economic rate of return in the efficiency use of the fixed and current assets with study case in mettalurgy

4 model of development of vertically and horizontally integrated structures in metallurgical engineering

5 a study on the process of fine-grained plumbiferous material agglomeration

6 the assessment of the morbidity with temporary disability of workers in the steel industry

7 silicon production using long flaming coal and improvement of its quality indicators

8 one-step extraction of antimony in low temperature from stibnite concentrate using iron oxide as sulfur-fixing agent

9 analysis of naturally etched surface of brass sheathing from a nineteenth-century shipwreck

10 numerical simulation of the heat treatment of the weld for steam generator

11 Evaluation via powder metallurgy of nano-reinforced iron powders developed for selective laser melting applications

12 Geometallurgy—A Route to More Resilient Mine Operations

13 PECULIARITIES OF SILICOTUBERCULOSIS IN THE WORKERS OF FERROUS METALLURGY ENTERPRISES

14 Influence of Ti on the Tensile Properties of the High-Strength Powder Metallurgy High Entropy Alloys.

15 A powder-metallurgy-based strategy toward three-dimensional graphene-like network for reinforcing copper matrix composites.

16 Injection in pyrometallurgy - the Howard Worner International Symposium

17 tribological analysis of mg2si particulates reinforced powder metallurgy magnesium alloy composites under oil lubrication condition

18 unidad docente metalúrgica síntesis histórica // educational center of metallurgy – historical synthesis

19 γ′ precipitation kinetics in the powder metallurgy superalloy n19 and influence of the precipitation latent heat

20 melting features and viscosity of sio2-cao-mgo-al2o3-feo nickel slag in laterite metallurgy

21 using alloys of cr-ni-co system as metallic bond in powder metallurgy products

22 properties of aluminum matrix nano composites prepared by powder metallurgy processing

23 arсhaeomineralogy of ancient nonferrous metallurgy pieces of the perm region: experience of usage of electron microprobe analysis

24 cnts/tic reinforced titanium matrix nanocomposites via powder metallurgy and its microstructural and mechanical properties

25 solid state batteries (ssbs) prepared with powder metallurgy route

26 Hydrometallurgy leaching of manganese from electrolytic manganese anode slime using hydrogen peroxide as reducing agent

27 Green and efficient recovery of valuable metals from by-products of zinc hydrometallurgy and reducing toxicity

28 Research on microstructure of membrane-slime layer on lead-based anode surface in zinc hydrometallurgy by combining μ-XRF with mm-XRF

29 The Effects of Phosphate Impurity on Recovered LiNi<inf>0.6</inf>Co<inf>0.2</inf>Mn<inf>0.2</inf>O<inf>2</inf> Cathode Material via a Hydrometallurgy Method

30 Dynamic multi-objective optimization and fuzzy AHP for copper removal process of zinc hydrometallurgy

31 Effect of in-situ oxidation on the phase composition and magnetic properties of Fe<inf>3</inf>O<inf>4</inf>: Implications for zinc hydrometallurgy

32 Novel approach to recycling of steel swarf using hydrometallurgy

33 Minimizing Fe-Bearing Waste Guided by Modulating the Precipitation Pathway: A Novel Magnetite Precipitation Approach for Zinc Hydrometallurgy

34 Corrigendum to “Removal and recovery of arsenic from concentrated sulfuric acid by solvent extraction” [Hydrometallurgy (2019) Volume 187101–112, (Hydrometallurgy (2019) 187(101-112) (S0304386X18309150), (10.1016/j.hydromet.2019.05.008))

35 A direct and rapid method for determination of total iron in environmental samples and hydrometallurgy using UV–Vis spectrophotometry

36 Sustainable route for Nd recycling from waste electronic components featured with unique element-specific sorting enabling simplified hydrometallurgy

37 Potential application of carbohydrate biomass in hydrometallurgy: one-pot reduction of metal oxides/salts under mild hydrothermal conditions

38 Optimization of selective gold recovery from electronic wastes through hydrometallurgy and adsorption

39 Thermodynamic and economic analysis of the solar carbothermal and hydrometallurgy routes for zinc production

40 Life cycle assessment and cost analysis for copper hydrometallurgy industry in China

41 Speciation and Mobility of Uranium in Waste Materials Generated by Mining and Hydrometallurgy in Jaduguda, India

42 Utilization of Incense Stick Ash in Hydrometallurgy Methods for Extracting Oxides of Fe, Al, Si, and Ca

43 Synthesis and Recyclability of Sheet-like Cobalt Carbonate Recovered from Spent Li-Ion Batteries Using a Simple Hydrometallurgy Process

44 Corrigendum to “A review on extractive metallurgy of tantalum and niobium” [Hydrometallurgy 198 (2020) 105496 https://doi.org/10.1016/j.hydromet.2020.105496]

45 A Review: Modeling of pH Probability Density Distribution in Zinc Hydrometallurgy Based on Gaussian Mixture Model

46 A Review on the Removal of Magnesium and Fluoride in Zinc Hydrometallurgy

47 Leaching kinetics of copper and valuable metal extraction from copper-cadmium residues of zinc hydrometallurgy by oxidation acid leaching

48 Simple, green organic acid-based hydrometallurgy for waste-to-energy storage devices: Recovery of NiMnCoC<inf>2</inf>O<inf>4</inf> as an electrode material for pseudocapacitor from spent LiNiMnCoO<inf>2</inf> batteries

49 Regeneration of Al-doped LiNi<inf>0.5</inf>Co<inf>0.2</inf>Mn<inf>0.3</inf>O<inf>2</inf> cathode material by simulated hydrometallurgy leachate of spent lithium-ion batteries

50 Determination of vanadium in vanadium hydrometallurgy by hydrogen peroxide spectrophotometry

Keyword Connections

Journals

Research Groups

Bibliographies