1 Localized 3pexcitations in 3dtransition-metal-series spectroscopy

2 Determination of trace silver in superalloys and steels by inductively coupled plasma-mass spectrometry

3 Determination of trace silver in superalloys and steels by inductively coupled plasma-mass spectrometry,

4 Anticryptosporidial effect of pomegranate peels water extract in experimentally infected mice with special reference to some biochemical parameters and antioxidant activity.

5 Adsorption kinetics for the removal of fluoride from aqueous solution by activated carbon adsorbents derived from the peels of selected citrus fruits

6 Carbon determination in carbon-manganese steels under atmospheric conditions by Laser-Induced Breakdown Spectroscopy.

7 The influence of wheel/rail contact conditions on the microstructure and hardness of railway wheels.

8 Friction modifiers effects on tribological behaviour of bainitic rail steels

9 Microstructural evolution of white and brown etching layers in pearlitic rail steels

10 Hardness matching of rail/wheel steels for high-speed-train based on wear rate and rolling contact fatigue performance

11 Microstructural and Mechanical Properties Examination of High-Power Diode Laser-Treated R260 Grade Rail Steels Under Different Processing Temperatures

12 A study on pharmacognostic and nutritional prospects of 'Star Gooseberry' Fruit (Phyllanthus acidus L. Skeels)

13 Investigation of excitation interference in laser-induced breakdown spectroscopy assisted with laser-induced fluorescence for chromium determination in low-alloy steels

14 Hybrid laser arc welding of thick high-strength pipeline steels of grade X120 with adapted heat input

15 Wear characterization from field and laboratory tests of pearlitic steels used for SAG mill liners

16 Site-oriented depigmentation in vitiligo patients using Q-switched Nd:YAG laser (1,064/532 nm), cryotherapy and chemical peels: A comparative study.

17 Green synthesis and characterization of silver nanoparticles using Kinnow mandarian peels extract and its application in shampoo formulation

18 Thermodynamic reasoning for colossal N supersaturation in austenitic and ferritic stainless steels during low-temperature nitridation

19 Multibody Dynamics Analysis of Railway Vehicle with Independently Rotating Wheels Using Negative Tread Conicity

20 Corrosion behavior of high nickel and conventional weathering steels exposed to a harsh marine atmospheric environment at Maldives

21 Small-angle neutron scattering reveals the effect of Mo on interphase nano-precipitation in Ti-Mo micro-alloyed steels

22 Unalloyed and low-alloy steels/cast steel

23 Unalloyed steels and low-alloy steels/cast steel

24 Unalloyed steels and low-alloy steels/cast steel

25 Modelling of austenite stability in low-alloy triple-phase steels

26 Abstracts: Ferrous Alloys: Pure Iron; Simple Alloys; Carbon Steels; Cast Iron; Low-Alloy Steel; High-Alloy Steel

27 Abstracts: Ferrous Alloys: Pure Iron; Simple Alloys; Carbon Steels; Cast Iron; Low-Alloy Steel; High-Alloy Steel

28 Effect of torch process on the steels used for bucket, shovel handle, and other high-tonne mining equipment

29 Cr2N coated martensitic stainless steels by pack cementation process as materials for bipolar plates of proton exchange membrane fuel cells

30 Optimal Machining Strategy Selection in Ball-End Milling of Hardened Steels for Injection Molds

31 Influence of the surface finish on corrosion resistance of stainless steels through machining and remelting on weld bead

32 Comparative study on antidiabetic, cytotoxicity, antioxidant and antibacterial properties of biosynthesized silver nanoparticles using outer peels of two varieties of (L.) Lam.

33 Effects of LaAlO3 and La2O2S inclusions on the initialization of localized corrosion of pipeline steels in NaCl solution

34 The Wear Responses of the Welded Joints of ASTM A335 Gr. P11 Steels Affected by Accelerated Flow Corrosion.

35 Fatigue Crack Growth Thresholds at Negative Stress Ratio for Ferritic Steels in ASME Code Section XI

36 Redistribution of carbon caused by butterfly defects in bearing steels

37 Diagnostic Yield of Fluorescence and Ziehl-Neelsen Staining Techniques in the Diagnosis of Pulmonary Tuberculosis: A Comparative Study in a District Health Facility.

38 Low-inertia centrifugal compressor wheels: Aerodynamic and mechanical design

39 Effect of multiphase microstructure on fatigue crack propagation behavior in TRIP-assisted steels

40 Hydrogen-assisted fatigue crack growth in ferritic steels – a fractographic study

41 Algorithm for automatic fatigue crack growth simulation on welded high strength steels

42 Experimental study of the effect of a slow-cooling heat treatment on the mechanical properties of high strength steels

43 Combining resistance spot welding and friction element welding for dissimilar joining of aluminum to high strength steels

44 Effect of retained austenite and non-metallic inclusions on the mechanical properties of resistance spot welding nuggets of low-alloy TRIP steels

45 Passage survival of European and American eels at Francis and propeller turbines.

46 Time-Frequency Analysis of Barkhausen Noise for the Needs of Anisotropy Evaluation of Grain-Oriented Steels.

47 Metabolomics Analysis of the Peels of Different Colored Citrus Fruits ( cv. 'Shatangju') During the Maturation Period Based on UHPLC-QQQ-MS.

48 Dissolution of alpha-prime precipitates in thermally embrittled S2205-duplex steels during reversion-heat treatment

49 Remanufacturing of die casting dies made of hot-work steels by using the wire-based electron-beam welding with an in situ heat treatment

50 Cast Steels for Creep-Resistant Parts Used in Heat Treatment Plants

51 INFLUENCE OF QUANTITATIVE ALLOYING OF TOOL STEELS FOR HOT DEFORMATION ON THE LEVEL OF HARDENING

52 THE IMPACT OF THE CAR BODY TILT WHEN MOVING ON CURVED TRACK SECTIONS ON THE INTERACTION BETWEEN WHEELS AND RAILS

53 Uncovering giant nanowheels for magnesium ion–based batteries

54 The Role of κ-Carbides as Hydrogen Traps in High-Mn Steels

55 An alternative live food for fish larvae; vinegar eels (Turbatrix aceti) enriched with bacterial protein

56 The hazards of off-road motor sports: Are four wheels better than two?

57 Analysis of Anti-Bullet Resistance of Armored Steels of Foreign Manufacture

58 Potential Natural Dyes Food from the Powder of Prickly Pear Fruit Peels ( spp.) Growing in the Mediterranean Basin under Climate Stress.

59 An oribatid mite, Hydrozetes lemnae (Hydrozetidae) on farmed eels Anguilla australis and A. dieffenbachii (Anguillidae)

60 Advances in Parallel-Detection EELS

61 From Transient to Sedentary? Changes in the Home Range Size and Environmental Patterns of Movements of European Eels (Anguilla anguilla) in a Mediterranean River

62 Corrosion Susceptibility of Cr–Mo Steels and Ferritic Stainless Steels in Biomass-Derived Pyrolysis Oil Constituents

63 improving the machining process by analysing the relationship between cutting force and temperature in drilling of engineering steels

64 load capacity of hardened gear wheels machined with cubic boron nitride (cbn) wedges

65 mechanical and service properties of low carbon steels processed by severe plastic deformation

66 fishways for eels

67 dynamic behavior of a railway wheelset on a roller rig versus tangent track

68 eneserefleksiooni seosed sotsiaalse toimetulekuga ühe- ja mitmekeelsete õpilaste hulgas

69 one-parametric determinationof uniform plastic strain for standard steels ОДНОПАРАМЕТРИЧЕСКОЕ ОПРЕДЕЛЕНИЕ РАВНОМЕРНОЙ ПЛАСТИЧЕСКОЙ ДЕФОРМАЦИИ СТАНДАРТНЫХ СТАЛЕЙ

70 a. soroceanu, niceta von remesiana. seelsorge und kirchenpolitik im spÄtantiken unteren donauraum

71 tensile properties of duplex uns s32205 and lean duplex uns s32304 steels and the influence of short duration 475 ºc aging

72 newsreels versus newspapers versus metadata

73 in vitro evaluation of the antibacterial and anti-inflammation activities of clausena lansium (lour.) skeels

74 rotary bending as a mean for improving micro-cleanliness of stainless steels for high demanding applications

75 effect of different current values on microstructure and mechanical properties of microalloyed steels joined by the submerged arc welding method

76 post-irradiation annealing behavior of helium in irradiated fe and ferritic-martensitic steels

77 comparative characteristics of immunohistochemical detection of m. tuberculosis antigens and mycobacteria by ziehl–neelsen method in lung tissue with tuberculoma during progressive course of tuberculosis

78 effects of sp2/sp3 ratio and hydrogen content on in vitro bending and frictional performance of dlc-coated orthodontic stainless steels

79 extractive spectrophotometric method for determination of molybdenum in steels and environmental samples

80 syzygium cumini (l.) skeels: a prominent source of bioactive molecules against cardiometabolic diseases

81 fault detection of a wheelset bearing based on appropriately sparse impulse extraction

82 detailed characterization of complex banding in air-cooled bainitic steels

83 wear research of railway wheelset profile by using computer simulation

84 application of bayesian ann and rjmcmc to predict the grain size of hot strip low carbon steels

85 analysis of the influence of the anisotropy induced by cold rolling on duplex and super-austenitic stainless steels

86 properties of resistance spot-welded twip steels

87 effect of dielectric properties of a solvent-water mixture used in microwave-assisted extraction of antioxidants from potato peels

88 biosorptive decontamination of acid red-87 dye from wastewater by citrus limonum peels: ecofriendly approach

89 evaluation of temper embrittlement of 30cr2mov rotor steels using electrochemical impedance spectroscopy technique

90 comparative effect of mo and cr on microstructure and mechanical properties in nbv-microalloyed bainitic steels

91 effect of high cl- environment on stress corrosion cracking behavior of m152 and 17-4ph high-strength steels

92 neural network modeling to evaluate the dynamic flow stress of high strength armor steels under high strain rate compression

93 effect of orientation of small defects on fatigue limit of steels

94 five new limonoids from peels of satsuma orange (citrus reticulata)

95 characterization of corrosion products formed on steels in the first months of atmospheric exposure

96 resistance spot weldability of galvanize coated and uncoated trip steels

97 corrosion behavior of austenitic and duplex stainless steels in lithium bromide

98 waarom verskil ons so oor wat die wil van god is? opmerkings oor christelike morele oordeelsvorming

99 an investigation into crystalline phases and nano structural and mechanical properties of hh heat resistant stainless steels

100 caracterização por xps de filmes passivos formados sobre aços de baixa liga em meio de bicarbonato xps characterization of passive films formed on mild steels in bicarbonate medium

101 an automated sensing system for steel bridge inspection using gmr sensor array and magnetic wheels of climbing robot

Keyword Connections

Journals

Research Groups

Bibliographies