11 Environmental-Friendly Modifications of Zeolite to Increase Its Sorption and Anion Exchange Properties, Physicochemical Studies of the Modified Materials.

12 Structural and Morphological Quantitative 3D Characterisation of Ammonium Nitrate Prills by X-Ray Computed Tomography

13 determination of the representative elementary volume for the study of sandstones and siltstones by x-ray microtomography

14 fabrication of slag-glass composite with controlled porosity

15 movimiento del agua en argiudoles de la pampa ondulada con diferente mineralogía de arcillas water movement in some argiudolls of the rolling pampa differing in their clay mineralogy

16 comparison of porosity assessment techniques for low-cost ceramic membranes

17 surface abrasion of glazed ceramic tiles

18 porosity of silicon carbide ceramics

19 bone apparent and material densities examined by cone beam computed tomography and the archimedes technique: comparison of the two methods and their results

20 comparison of polymethylmethacrylate (pmma), native calcium sulfate, and high porous calcium sulfate beads as gentamicin carriers and osteoblast attachment

21 raw material for the ceramic industry in norte de santander. iii. assessment of the technological properties when the residue test of deep abrasion is added

22 filtration properties of auxetics with rotating rigid units

23 methods to evaluate some reservoir characterization by means of the geophysical data in the strata of limestone and marl

24 effect of hot-isostatic pressing on microstructure and mechanical properties of second generation single crystal superalloy dd6

25 production of a porosity map by kriging in sandstone reservoirs, case study from the sava depression

26 Microstructure Analysis and Fatigue Behavior of Laser Beam Welding 2060-T8/2099-T83 Aluminum–Lithium Alloys

27 Groundwater dynamics due to general stream fluctuations in an unconfined single or dual-porosity aquifer subjected to general areal recharge

28 Superior Mesoporosity of Lipid Free Spent Coffee Grounds Residues.

29 Effect of bifunctional acid on the porosity improvement of biomass-derived activated carbon for methylene blue adsorption.

30 Chemical Composition and Porosity Characteristics of Various Calcium Silicate-Based Endodontic Cements

31 Combination of Solid-State and Electrochemical Impedance Spectroscopy To Explore Effects of Porosity in Sol-Gel-Derived BaTiO Thin Films.

32 Engineering of phosphate-functionalized biochars with highly developed surface area and porosity for efficient and selective extraction of uranium

33 Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting

34 Design, manufacture and testing of porous materials with ordered and random porosity: Application to porous medium burners

35 Porosity effects in flame length of the porous burners

36 Twofold Porosity and Surface Functionalization Effect on Pt-Porous GaN for High-Performance H-Gas Sensors at Room Temperature.

37 Estimating porosity and hydraulic conductivity for hydrogeology on the basis of reservoir and elastic petrophysical parameters

38 Correction to: Push-pull tests for estimating effective porosity: expanded analytical solution and in situ application (Hydrogeology Journal, (2018), 26, 2, (381-393), 10.1007/s10040-017-1672-3)

39 Uncertainty analysis of metal-casting porosity measurements using Archimedes' principle

40 Border porosity and counterinsurgency in Nigeria

41 Porosity effects in laminar fluid flow near permeable surfaces.

42 Mitigation of porosity defects in fiber laser welding under low vacuum

43 Effect of different drying techniques on density, porosity and bioactivity of β-wollastonite from local limestone and rice straw

44 Investigation of the mechanical properties and porosity relationships in selective laser-sintered polyhedral for functionally graded scaffolds.

45 Reducing Shrinkage Porosity in High-Performance Steel Castings: Case of an ASME B16.34 Gate Valve Body: Part 2—Simulation and Experimental Verification

46 Three-dimensional cellular automaton simulation of coupled hydrogen porosity and microstructure during solidification of ternary aluminum alloys.

47 Shrinkage Porosity Control in Aluminum Alloy Cylinder Head Based on Casting Simulation Technology

48 Evaluation of porosity in Al alloy die castings

49 High Pressure Die Casting Porosity Defect Analysis and Experimental Validation for Power Steering Columns and DVVTs

50 Failure analyses of centrifugal casting ethylene pyrolysis furnace tubes from microporosity defects

51 Effect of cooling rate on the porosity defect in the thick aluminum casting by 3D computed tomography analysis

52 Mechanisms and mechanics of porosity formation in ductile iron castings

53 Discussion on usability of the niyama criterion for porosity predicting in cast iron castings

54 Prediction of microporosity in complex thin-wall castings with the dimensionless niyama criterion

55 Prediction of microporosity in complex thin-wall castings with the dimensionless Niyama criterion

56 Application of Niyama criterion in the shrinkage porosity prediction of metal mold gravity casting aluminum alloy motorcycle wheel

57 Applicability of shrinkage porosity prediction for casting with Niyama criterion

58 Discussion on Usability of the Niyama Criterion for Porosity Predicting in Cast Iron Castings

59 High porosity with tiny pore constrictions and unbending pathways characterize the 3D structure of intervessel pit membranes in angiosperm xylem.

60 Development of a porosity prediction model based on shrinkage velocity and glass transition temperature

61 Influence of Age Hardening on Mechanical Properties of Cast Nickel-Aluminum Bronze Containing Shrinkage Porosity

62 Technological Measures of Preventing Shrinkage Porosity in Jewelry Castings

63 Effect of pouring system on shrinkage porosity of TiAl alloy rod castings by centrifugal casting

64 Effect of Thermoelectric Magnetic Convection on Shrinkage Porosity at the Final Stage of Solidification of GCr18Mo Steel Under Axial Static Magnetic Field

65 Real-time X-ray Radiography and Computational Modeling of Shrinkage Porosity Formation in Aluminum Alloy Castings

66 Effect of Preconditioning and Inoculation on Graphite Nodule Count and Their Size Distribution in Spheroidal Graphite (SG) Cast Iron: A Study to Minimise Rejection of Castings Due to Shrinkage Porosity

67 Minimization of shrinkage porosity in HPDC process with local squeeze pin using flow simulation

68 Characterization of microstructure and shrinkage porosity of a semi-solid metal slurry in gravity die casting

69 Evolution of shrinkage, real density, porosity, heat and mass transfer coefficients during indirect solar drying of cocoa beans

70 Optimization of Permanent Mold Casting Processes for Shrinkage Porosity Reduction in Cu-45Ag Alloy by Simulation and Taguchi Method

71 Reducing Shrinkage Porosity in High-Performance Steel Castings: Case of an ASME B16.34 Gate Valve Body: Part 1—Analysis, Techniques and Experimental Approach

72 Suppression of shrinkage porosity in laser-joining of CFRP and steel using a laser surface modification process “Surfi-Sculpt ®”

73 Shrinkage Porosity in Die Casting Components

74 Control countermeasures of center porosity and shrinkage in 45 steel continuous casting bloom

75 A method based on semi-solid forming for eliminating coarse dendrites and shrinkage porosity of H13 tool steel

76 Determination of porosity from shrinkage curves during sintering of granular materials

77 Shrinkage porosity formation in cast iron components

78 Influence of shrinkage porosity on fracture under tensile stress in ductile cast iron

79 The role of biochar porosity and surface functionality in augmenting hydrologic properties of a sandy soil.

80 Ultrasonic Nondestructive Evaluation of Porosity Size and Location of Spot Welding Based on Wavelet Packet Analysis

81 Effects of non-uniform porosity on thermochemical performance of solar driven methane reforming

82 Platinum Nanoparticle Inclusion into a Carbonized Polymer of Intrinsic Microporosity: Electrochemical Characteristics of a Catalyst for Electroless Hydrogen Peroxide Production.

83 Miscible blends of carboxylated polymers of intrinsic microporosity (cPIM-1) and Matrimid

84 The potential of polymers of intrinsic microporosity (PIMs) and PIM/graphene composites for pervaporation membranes

85 A theoretical analysis of Biorheological fluid flowing through a complex wavy convergent channel under porosity and electro-magneto-hydrodynamics Effects.

86 Removal of Antibiotics from Water by Polymer of Intrinsic Microporosity: Isotherms, Kinetics, Thermodynamics, and Adsorption Mechanism

87 Porosity and carbon dioxide storage capacity of the Maryville-Basal sands section (middle Cambrian), Southern Appalachian Basin, Kentucky

88 Mechanical properties of illite‐based ceramics with controlled porosity studied by modern in situ techniques

89 effect of porosity and concentration polarization on electrolyte diffusive transport parameters through ceramic membranes with similar nanopore size

90 three dimensional characterization of soil macroporosity by x-ray microtomography

91 separation of the inter- and intra-particle porosity in images of powder compacts

92 fabrication and mechanical characterisation of titanium lattices with graded porosity

93 porosity of convex nowhere dense subsets of normed linear spaces

94 porosity design procedure at the directed solidification of castings

95 free volume and gas permeation in anthracene maleimide-based polymers of intrinsic microporosity

96 analysis of different statistical models in probabilistic joint estimation of porosity and litho-fluid facies from acoustic impedance values

97 plasma sintering of unalloyed iron: a study of surface porosity

98 destruction of ferromagnetig material particles in magnetovibrating layer with high porosity

99 σ-porosity in monotonic analysis with applications to optimization

100 porosity and models with discrete innovations

101 a rapid and efficient methodology to convert fractured reservoir images into a dual-porosity model méthodologie rapide et efficace pour convertir les images de réservoir fracturé en modèle à double porosité

Keyword Connections

Journals

Research Groups

Bibliographies