7 Toward defect-free additive fabricating of flexible and hybrid electronics: Physics-based computational modeling and control of aerosol jet printing

8 Flexographic Printing and Integral Approach to Pollution Prevention and Control

9 Customization of flexographic printing plates related to uvc-induced changes in the crosslinking degree

10 In-plane 2-D patterning of microporous layer by inkjet printing for water management of polymer electrolyte fuel cell

11 Adaptive metamaterials by functionally graded 4D printing

12 Laser sintering process optimization of microstrip antenna fabricated by inkjet printing with silver-based MOD ink

13 Preliminary Characterization of Novel LDPE-Based Wear-Resistant Composite Suitable for FDM 3D Printing

14 Desktop-stereolithography 3D printing of a radially oriented extracellular matrix/mesenchymal stem cell exosome bioink for osteochondral defect regeneration.

15 Feasibility Study of Single-crystal Si Islands Manufacturing by Microscale Printing of Nanoparticles and Laser Crystallization.

16 Photothermal Welding, Melting, and Patterned Expansion of Nonwoven Mats of Polymer Nanofibers for Biomedical and Printing Applications.

17 La cultura impresa en los avisos publicitarios de la prensa gráfica en la Argentina durante el siglo XX. Alcances y proyecciones (PRIG 2016-2018) = The print culture in advertisements of the printing press in Argentina during the twentieth century. Scopes and projections

18 Volumetric computed tomography reconstruction, rapid prototyping and 3d printing of opossum head (Didelphis albiventris)

19 Rapid prototyping and 3D printing of antarctic seal flipper tags

20 The Realization of Redistribution Layers for FOWLP by Inkjet Printing

21 Materials Properties of Printable Edible Inks and Printing Parameters Optimization during 3D Printing: a review.

22 3D printing hydrogel with graphene oxide is functional in cartilage protection by influencing the signal pathway of Rank/Rankl/OPG.

23 CHARACTERISTICS OF PRODUCTS MADE OF 17-4PH STEEL BY MEANS OF 3D PRINTING METHOD

24 Fabricating Mechanically Robust Binder-Free Structured Zeolites by 3D Printing Coupled with Zeolite Soldering: A Superior Configuration for CO Capture.

25 Microcontact Printing with Laser Direct Writing Carbonization for Facile Fabrication of Carbon-Based Ultrathin Disk Arrays and Ordered Holey Films.

26 The new rules of attraction: New techniques are needed when selling digital printing applications

27 Residual grade and waste abaca fibers as reinforcement for packaging and printing/writing papers from recycled fiber

28 Improving printing and writing paper properties by coating with nanoclay montmorillonite (K10)

29 Customized tracheal design using 3D printing of a polymer hydrogel: influence of UV laser cross-linking on mechanical properties.

30 Application of 3D Printing in the Construction of Burr Hole Ring for Deep Brain Stimulation Implants.

31 From patient to maker - a case study of co-designing an assistive device using 3D printing.

32 Machine learning for mixture toxicity analysis based on high-throughput printing technology

33 Small splint external fixation combined with 3D printing brace for the treatment of Colles fractures

34 3D Printing of Metallic Microstructured Mould Using Selective Laser Melting for Injection Moulding of Plastic Microfluidic Devices.

35 Optimization parameter effects on the quality surface finish of the three-dimensional printing (3D-printing) fused deposition modeling (FDM) using RSM

36 Layer-by-layer inkjet printing GO film and Ag nanoparticles supported nickel cobalt layered double hydroxide as a flexible and binder-free electrode for supercapacitors.

37 3D printing for rapid prototyping of low-Z/density ionization chamber arrays.

38 Regarding the parallel opposed editorial about: 3D printing technology will eventually eliminate the need of purchasing commercial phantoms for clinical medical physics QA procedures

39 3D printing technology will eventually eliminate the need of purchasing commercial phantoms for clinical medical physics QA procedures

40 Three-dimensional printing-assisted surgical technique with limited operative exposure for both-column acetabular fractures

41 Lignin: A Biopolymer from Forestry Biomass for Biocomposites and 3D Printing.

42 Three-Dimensional Printing of Drug-Loaded Scaffolds for Antibacterial and Analgesic Applications

43 On the 3D printing of recycled ABS, PLA and HIPS thermoplastics for structural applications

44 Graphene-Based Inks for Printing of Planar Micro-Supercapacitors: A Review

45 Transfer Printing Technology as a Straightforward Method to Fabricate Chemical Sensors Based on Tin Dioxide Nanowires

46 Scalable Fabrication of Highly Crystalline Organic Semiconductor Thin Film by Channel-Restricted Screen Printing toward the Low-Cost Fabrication of High-Performance Transistor Arrays

47 Solution-Processable Multi-Color Printing Using UV Nanoimprint Lithography.

48 Development of karanja oil based offset printing ink in comparison with linseed oil.

49 Mechanochromic luminescent materials with aggregation-induced emission: Mechanism study and application for pressure measuring and mechanical printing

50 Direct analysis in real time accurate mass spectrometry determination of bisphenol A in thermal printing paper.

51 Complex formulations, simple techniques: Can 3D printing technology be the Midas touch in pharmaceutical industry?

52 Scalable Inkjet-Based Structural Color Printing by Molding Transparent Gratings on Multilayer Nanostructured Surfaces.

53 Fabrication and characterisation of ceramics via low-cost DLP 3D printing

54 Human stem cell responses and surface characteristics of 3D printing Co-Cr dental material

55 A Versatile 3D and 4D Printing System through Photocontrolled RAFT Polymerization.

56 Process development for green part printing using binder jetting additive manufacturing

57 Lithography-based ceramic manufacturing (LCM) – Viscosity and cleaning as two quality influencing steps in the process chain of printing green parts

58 Process Parameter Optimization of Extrusion-Based 3D Metal Printing Utilizing PW–LDPE–SA Binder System

59 Extending the 3D food printing tests at high speed. Material deposition and effect of non-printing movements on the final quality of printed structures

60 Mechanical and functional validation of a perfused, robot-assisted partial nephrectomy simulation platform using a combination of 3D printing and hydrogel casting.

61 Incorporation and validation of clinically relevant performance metrics of simulation (CRPMS) into a novel full-immersion simulation platform for nerve-sparing robot-assisted radical prostatectomy (NS-RARP) utilizing three-dimensional printing and hydrogel casting technology.

62 3D Printing of Conductive Tissue Engineering Scaffolds Containing Polypyrrole Nanoparticles with Different Morphologies and Concentrations.

63 The Effect of Accelerator Dosage on Fresh Concrete Properties and on Interlayer Strength in Shotcrete 3D Printing.

64 Grain structure control during metal 3D printing by high-intensity ultrasound.

65 Assessing the dynamic extrusion-based 3D printing process for power-law fluid using numerical simulation

66 Application of polymeric ferric sulfate combined with cross-frequency magnetic field in the printing and dyeing wastewater treatment.

67 4D Printing of Recyclable Lightweight Architectures Using High Recovery Stress Shape Memory Polymer

68 Non-powered capillary force-driven stamped approach for directly printing nanomaterials aqueous solution on paper substrate.

69 Nanotransfer Printing on Textile Substrate with Water-Soluble Polymer Nanotemplate.

70 The Effect of Viscosity-Modifying Admixture on the Extrudability of Limestone and Calcined Clay-Based Cementitious Material for Extrusion-Based 3D Concrete Printing.

71 Printed Smart Devices on Cellulose-Based Materials by means of Aerosol-Jet Printing and Photonic Curing.

72 Intense Pulsed Light unprinting for reducing life-cycle stages in recycling of coated printing paper

73 Colloidal PbS quantum dot stacking kinetics during deposition via printing.

74 The role of 3D printing and open design on adoption of socially sustainable supply chain innovation

75 MXene Printing and Patterned Coating for Device Applications.

76 Applications of 3D Printing Technology to Address COVID-19 Related Supply Shortages.

77 Model tests of bending and torsional deformations of thin-walled profiles stiffened with elements made in 3D printing technology

78 Investigations on the Processing of Ceramic Filled Inks for 3D InkJet Printing

79 two-way 4d printing: a review on the reversibility of 3d-printed shape memory materials

80 the influence of the silk screen printing inks on environment

81 teaching russian as a foreign language at russian universities: multi-authored monograph. – khabarovsk: pacific national university printing house, 2016.

82 improving printing process in reflow and thick film technology through analysis and modeling of paste rheology

83 influence of printing speed on production of embossing tools using fdm 3d printing technology

84 synthesis and evaluation of new anti-microbial additive based on pyrimidine derivative incorporated physically into polyurethane varnish for surface coating and into printing ink paste

85 online detection of peroxidase using 3d printing, active magnetic mixing, and spectra analysis

86 legal deposit in the sultanate of oman: the law of printing and publishing and its role in building oman’s culture of democracy

87 pengaruh posisi orientasi objek pada proses rapid prototyping 3d printing terhadap kekuatan tarik material polymer

88 validity evaluation of the assessment method for postural loading on the upper body in printing industry

89 patronage or debt in the printing work of diego de gumiel

90 the write way to spell: printing versus typing effects on orthographic learning

91 machine directional register system modeling for shaft-less drive gravure printing machines

92 dramatic advance in quality in flexographic printing

93 characteristic evaluation of organic light-emitting diodes prepared with stamp printing technique

94 research on the impact of 3d printing on the international supply chain

95 shearing strength test of ortopedic titanium alloy screw produced in the process of 3d technology printing

96 Modification of Manila Grass Activated Carbon for Reactive Dye Adsorption from Textile Printing Wastewater

97 statistical analysis of the flexographic printing quality

98 application of biomaterials and inkjet printing to develop bacterial culture system

99 optimizing 3d concrete printing: exploring potentials and limitations of materials and production

100 sixty years of the military technical courier: origins of the military technical thinking in the military printing of the kingdom of serbia

101 “featron or historical shame” w. stratemana – memo book cyrillic printing: historical and bibliographic analysis

Keyword Connections

Journals

Research Groups

Bibliographies