Modeling of Integrated Nanoneedle-Microfluidic System for Single Cell Temperature Measurement
Current Language EN
English English Türkçe Türkçe Español Español Português Português Pусский Pусский Filipino Filipino Tiếng Việt Tiếng Việt हिन्दी हिन्दी العربية العربية বাংলা বাংলা Deutsch Deutsch 中文 中文

Modeling of Integrated Nanoneedle-Microfluidic System for Single Cell Temperature Measurement

Binsilm, Salma Abdullah;Rad, Maryam Alsadat;Ahmad, Mohd Ridzuan;
applied sciences 2016 Vol. 6 pp. 339-
202
binsilm2016modelingapplied

Abstract

In this research, a finite element study on a nanoneedle-microfluidic system for single cell temperature measurement is presented. The nanoneedle design and electrical and mechanical characterization are analyzed, in which tungsten is used as the sensing material. A rectangular shaped sensor with a gap of 10.8 µm showed to give the same current density distribution within the nanoneedle, and a 90 nm2 cross-sectional area showed to cause minimum damage to the cell. Furthermore, the current showed to have a positive temperature coefficient of resistance (TCR) with an increase in the temperature, and the nanoneedle showed to be able to resist ramp force up to 22.5 μN before failure. Electrical measurement on yeast cell showed that the nanoneedle was independent of the cell conductivity. The nanoneedle proved to be able to measure temperature with a current difference of 50 nA and a resolution of 0.02 °C in 10 ms. A Y-shaped microchannel was proposed and the microchannel cross-sectional area was optimized to be 63 μm2 and a flow rate of 24.6 pL/min allowed successful cell penetration causing minimal damage to the cell.

Keywords

chemistry Therapeutics. Pharmacology Biology (General) Medicine Materials of engineering and construction. Mechanics of materials Technology (General) Engineering (General). Civil engineering (General) Technology Mechanical engineering and machinery physics chemical engineering electronics mining engineering. metallurgy

Access

URL:
http://www.mdpi.com/2076-3417/6/12/339

Citation

ID: 92256
Ref Key: binsilm2016modelingapplied
Use this key to autocite in SciMatic or Thesis Manager

References

References

No Bibliography

Blockchain Verification

Account:
NFT Contract Address:
0x95644003c57E6F55A65596E3D9Eac6813e3566dA
Article ID:
92256
Unique Identifier:
Network:
Scimatic Chain (ID: 481)
Blockchain Readiness Checklist
Authors
Abstract
Journal Name
Year
Title
5/5
Creates 1,000,000 NFT tokens for this article
Token Features:
  • ERC-1155 Standard NFT
  • 1 Million Supply per Article
  • Transferable via MetaMask
  • Permanent Blockchain Record
Blockchain QR Code
Scan with Saymatik Web3.0 Wallet
Gas fees required in SCI Coins
Buy SCI

Saymatik Web3.0 Wallet

Google Play
App Store