Machining of circular micro holes by electrochemical micro-machining process
Abstract
Machining of micro holes with micro electrochemical machining (micro ECM) process has been carried out with an indigenously developed set up. This paper describes relevant problems and solutions for the circular micro holes machining process on 304 stainless steel sheets with 60 μm thickness using high speed steel cylindrical tool of diameter 500 μm and using dilute H2SO4 as electrolyte. The taper angle variation of the machined hole is analyzed and reported for different experimental setting parameters. The minimum value of the taper angle of machined holes is achieved at the parameter setting of 0.4 mol/L H2SO4, 700 kHz, 600 ns and 21 V, for stainless steel sheets and HSS tool.
Keywords
Access
Citation
ID:
111203
References
Blockchain Verification
Account:
NFT Contract Address:
0x95644003c57E6F55A65596E3D9Eac6813e3566dA
Article ID:
111203
Unique Identifier:
doi:10.1007/s40436-013-0042-1
Network:
Scimatic Chain (ID: 481)
Loading...
Blockchain Readiness Checklist
Authors
Abstract
Journal Name
Year
Title
Creates 1,000,000 NFT tokens for this article
Token Features:
- ERC-1155 Standard NFT
- 1 Million Supply per Article
- Transferable via MetaMask
- Permanent Blockchain Record
Scan with Saymatik Web3.0 Wallet
