1 Influence of Minor Cr Additions on Crystal Growth in Rapidly Solidified Al-20Zn Alloys.

2 Archimedean lattices emerge in template-directed eutectic solidification.

3 A Study of the Effect of 5 at.% Sn on the Micro-Structure and Isothermal Oxidation at 800 and 1200 °C of Nb-24Ti-18Si Based Alloys with Al and/or Cr Additions.

4 Immobilization of cesium with alkali-activated blast furnace slag.

5 Effect of Mold Geometry on Pore Size in Freeze-Cast Chitosan-Alginate Scaffolds for Tissue Engineering.

6 experimental casting of forging ingots from model material

7 solidification of fe19cr2.9c2v alloy

8 thermal analysis as a microstructure prediction tool for a356 aluminium parts solidified under various cooling conditions

9 effects of the fe/mn weight ratio and cooling rate on the area fractions of α-alfesi and β-alfesi phases in al-7.5si-3.75cu-0.5mg-0.55fe-xmn aluminum alloy

10 thermodynamic analysis of 6xxx series al alloys: phase fraction diagrams

11 tem characterization and properties of cu-1 wt.% tib2 nanocomposite prepared by rapid solidification and subsequent heat treatment

12 EFFECT OF SOLIDIFICATION RATE ON CORROSION RESISTANCE OF CAST Al-10Mg2Si IN-SITU COMPOSITES

13 EFFECT OF SOLIDIFICATION RATE ON CORROSION RESISTANCE OF CAST Al-10Mg2Si IN-SITU COMPOSITES

14 Topological description of the solidification of undercooled fluids and the temperature dependence of the thermal conductivity of crystalline and glassy solids above approximately 50 K.

15 Effects of radiative local heating on metal solidification during selective laser melting for additive manufacturing

16 Microwave-assisted dispersive liquid-liquid microextraction coupling to solidification of floating organic droplet for colorants analysis in selected cosmetics by liquid chromatography

17 Extraction of methylparaben in cosmetics using dispersive liquid-liquid microextraction based on solidification of floating organic drop coupled with gas chromatography flame ionization detector

18 In matrix formation of deep eutectic solvent used in liquid phase extraction coupled with solidification of organic droplets dispersive liquid-liquid microextraction; application in determination of some pesticides in milk samples

19 Tailoring the crystallinity of solution-processed 6,13-bis(triisopropylsilylethynyl)pentacene via controlled solidification.

20 Corrigendum to ‘Neutron computed tomography of phase separation structures in solidified Cu-Co alloys and investigation of relationship between the structures and melt convection during solidification’ (Scripta Materialia (2020) 175 (29–32), (S1359646219305263), (10.1016/j.scriptamat.2019.08.041))

21 Assessment of individual and mixed alkali activated binders for solidification of a nuclear grade organic resin loaded with Cs, Co and Eu radionuclides.

22 X-ray phase contrast observation of solidification and hot crack propagation in laser spot welding of aluminum alloy.

23 Production of aprepitant nanocrystals by wet media milling and subsequent solidification.

24 Three-dimensional cellular automaton simulation of coupled hydrogen porosity and microstructure during solidification of ternary aluminum alloys.

25 Sand casting of sheet lead: numerical simulation of metal flow and solidification

26 Modelling and Simulation of Globular Equiaxed Eutectic Solidification in a Direct Chill Casting of Aluminium Binary Alloy Systems

27 Research on Formation of Oscillation Marks from Continuous Casting of Automobile Steel Plate and its Solidification Process Simulation

28 Solidification and multi-cytotoxicity evaluation of thermally treated MSWI fly ash.

29 Microbial induced solidification and stabilization of municipal solid waste incineration fly ash with high alkalinity and heavy metal toxicity.

30 Laboratory method of microbial induced solidification/stabilization for municipal solid waste incineration fly ash.

31 Numerical simulation of fluid flow, solidification and defects in high pressure die casting (HPDC) process

32 Mechanism exploration on the aluminum supplementation coupling the electrokinetics-activating geopolymerization that reinforces the solidification of the municipal solid waste incineration fly ashes.

33 Applicability of mixed solidification material based on inorganic waste as soil stabilizer

34 Metastable microstructures in the solidification of undercooled high entropy alloys

35 Enhancing impurities removal from Si by controlling crystal growth in directional solidification refining with Al–Si alloy

36 Adsorption and solidification of peppermint oil on microcrystalline cellulose surface: An experimental and DFT study

37 Solidification expedition of Phase Change Material in a triplex-tube storage unit via novel fins and SWCNT nanoparticles

38 Numerical modeling of YSZ droplet impact/spreading with solidification microstructure formation in plasma spraying

39 Numerical and experimental campaigns for lead solidification modelling and testing

40 Manufacturing of thin-walled Ni-based superalloy castings using alternative thermal insulating module to control solidification

41 Analysis of organophosphorus and pyrethroid pesticides in organic and conventional vegetables using QuEChERS combined with dispersive liquid-liquid microextraction based on the solidification of floating organic droplet

42 Microcharacterization and mechanical performance of an Al-50Si alloy prepared using the sub-rapid solidification technique

43 Microstructure and mechanical properties of Al-Mg-Si alloy fabricated by a short process based on sub-rapid solidification

44 Micromechanical impact of solidification regions in ductile iron revealed via a 3D strain partitioning analysis method

45 Direct formation of La(Fe,Si)<inf>13</inf> phase with enhanced mechanical property of off-stoichiometric La<inf>1.7</inf>Fe<inf>11.6</inf>Si<inf>1.4</inf> alloys by directional solidification

46 Effect of stabilization/solidification on mechanical and phase characteristics of organic river silt by a stabilizer

47 Stabilization and solidification of arsenic and iron contaminated canola meal biochar using chemically modified phosphate binders

48 Growth behaviors of CoSn<inf>2</inf>/CoSn<inf>4</inf> composite particles in the solidification of Sn–Co alloy under a high magnetic field

49 Effects of pulling rate on metal impurity removal during Si refining in Ti-90 wt.% Si alloy directional solidification

50 Solidification orientation relationships between Al<inf>3</inf>Ti and TiB<inf>2</inf>

51 Can halloysite nanotubes be used to remediate zinc and lead-contaminated marine clay? A solidification/stabilization approach

52 Primary dendrite growth kinetics and rapid solidification mechanism of highly undercooled Ti-Al alloys

53 Multi-scale simulation of grain/sub-grain structure evolution during solidification in laser welding of aluminum alloys

54 Rapid solidification of a FeSi intermetallic compound in undercooled melts: dendrite growth and microstructure transitions

55 Phase-field simulation of solidification microstructure in Ni and Cu–Ni alloy using the Wheeler, Boettinger and McFadden model coupled with the CALPHAD data

56 Existence and regularity of solutions of a phase field model for solidification with convection of pure materials in two dimensions

57 Numerical Simulation on the Origin of Solidification Cracking in Laser Welded Thick-Walled Structures

58 Effects of Solidification Pressure and Heat Treatment on the Microstructure and Micro-Hardness of AlSi9CuMg Alloy.

59 A Phenomenological Analysis of Freckling in Directional Solidification of Ni-Base Superalloy: The Role of Edge and Curvature in Casting Components

60 The effect of frequency on solidification characteristics of AZ80 alloy during electromagnetic DC casting

61 Process parameter effects on solidification behavior of the superalloy during investment casting

62 Numerical investigation on solidification in casting using ProCAST

63 The impact of the casting thickness on the interfacial heat transfer and solidification of the casting during permanent mold casting of an A356 alloy

64 Effect of electromagnetic fields on microstructure and mechanical properties of sub-rapid solidification-processed Al–Mg–Si alloy during twin-roll casting

65 Experimental investigation on solidification of GCr15 bearing steel by the simulated continuous casting

66 A Solidification Time-Based Method for Rapid Evaluation of the Mechanical Properties of Grey Iron Castings

67 Correction to: Comparison of Uniform and Non-uniform Water Flux Density Approaches Applied on a Mathematical Model of Heat Transfer and Solidification for a Continuous Casting of Round Billets (Metallurgical and Materials Transactions B, (2015), 46, 1, (366-377), 10.1007/s11663-014-0200-2)

68 Sub-rapid Solidification and Its Related Interfacial Heat-Transfer Behaviors in Strip Casting Process

69 Study on Solidification Process of ZL114A Wheel Casting

70 Continuous Casting of Aluminum Alloys Combined with Their Deformation during Solidification

71 Implementation of a standard stream-upwind stabilization scheme in the element-free Galerkin based solution of advection-dominated heat transfer problems during solidification in direct chill casting processes

72 Influence of Electropulsing Treatment on the Initial Solidification of Molten Steel During Continuous Casting

73 Design and application of an EMAT for solidification shell thickness detection in continuous casting slab based on the pulse compression technique

74 Integrated System of Thermal/Dimensional Analysis for Quality Control of Gray and Ductile Iron Castings Solidification

75 Influence of Electromagnetic Swirling Flow in Nozzle on Solidification Structure and Macrosegregation of Continuous Casting Square Billet

76 Influence of the Pressure of Open-Close Water-Cooled Moulds on Casting/Mould Interface Heat Transfer and Casting Solidification Process

77 Effect of different parameters on solidification structure of multi-crystalline silicon produced by continuous casting

78 Online Modelling of Heat Transfer, Solidification and Microstructure in Continuous Casting of Steel

79 Effect of mould design on the Niyama criteria during solidification of CH3C 80t ingot

80 Effect of Thermoelectric Magnetic Convection on Shrinkage Porosity at the Final Stage of Solidification of GCr18Mo Steel Under Axial Static Magnetic Field

81 Geometrical modulus of a casting and its influence on solidification process

82 Determining dendrite arm spacing in directional solidification using a fast Fourier transform method

83 New ternary blend limestone calcined clay cement for solidification/stabilization of zinc contaminated soil.

84 application of numerical modeling at technology designing of heating and solidification of concrete in monolithic structures

85 microstructure and mechanical properties of ni3al intermetallics prepared by directional solidification electromagnetic cold crucible technique

86 influence of external and internal cooling at solidification on strength of brittle duralumin in compression

87 secondary solidification behavior of a356 aluminum alloy prepared by the self-inoculation method

88 porosity design procedure at the directed solidification of castings

89 gastrointestinal obstruction caused by solidification and coagulation of enteral nutrition: pathogenetic mechanisms and potential risk factors

90 construction and analysis of dynamic solidification curves for non-equilibrium solidification process in lost-foam casting hypo-eutectic gray cast iron

91 liquid-liquid phase separation and solidification behavior of al55bi36cu9 monotectic alloy with different cooling rates

92 Determination of organochlorine compounds in fish liver by ultrasound-assisted dispersive liquid–liquid microextraction based on solidification of organic droplet coupled with gas chromatography-electron capture detection

93 the correlation between the eigenvalues of global fem matrix and the size of time step in the numerical solutions of solidification equation

94 application of fuzzy set theory to quantitative analysis of correctness of the mathematical model based on the adi method during solidification

95 numerical simulation and optimization of directional solidification process of single crystal superalloy casting

96 rapid solidification of an al-5ni alloy processed by spray forming

97 a comprehensive comparison of the analytical and numerical prediction of the thermal history and solidification microstructure of inconel 718 products made by laser powder-bed fusion

98 a method based on ultrasound-assisted solidification of floating drop microextraction technique for the spectrophotometric determination of curcumin in turmeric powder

99 Optimization for the preparation of composite geopolymer using response surface methodology and its application in lead-zinc tailings solidification

100 Controlled preparation of cerium oxide loaded slag-based geopolymer microspheres (CeO@SGMs) for the adsorptive removal and solidification of F from acidic waste-water.

101 Influence of M-EMS on Fluid Flow and Initial Solidification in Slab Continuous Casting

Keyword Connections

Journals

Research Groups

Bibliographies