1 Effect of Zeolite on Shrinkage and Crack Resistance of High-Performance Cement-Based Concrete

2 Effect of Zeolite on Shrinkage and Crack Resistance of High-Performance Cement-Based Concrete

3 drastic enhancement of propene yield from 1-hexene catalytic cracking using a shape intensified meso-sapo-34 catalyst

4 cracking and deformation modelling of tensile rc members using stress transfer approach / tempiamųjų gelžbetoninių elementų pleišėjimo ir deformacijų modeliavimas įtempių perdavimo algoritmu

5 fatigue examination of hsla steel with yield strength of 960 mpa and its welded joints under strain mode

6 simulation of be armour cracking under iter-like transient heat loads

7 synthesis zro2-montmorillonite and application as catalyst in catalytic cracking of heavy fraction of crude oil

8 the hardness and strength properties of wc-co composites

9 Tailoring Periodic Vertical Cracks in Thermal Barrier Coatings Enabling High Strain Tolerance

10 Synthesis of core-shell structured FAU/SBA-15 composite molecular sieves and their performance in catalytic cracking of polystyrene.

11 Catalytic cracking of palm oil for the production of biofuels: optimization studies.

12 Effect of cold work and slow strain rate on 321SS stress corrosion cracking in abnormal conditions of simulated PWR primary environment

13 Study of the brickwork masonry cracking with a cohesive fracture model

14 Cracking mechanism and susceptibility of laser melting deposited Inconel 738 superalloy

15 Cracking of platinum/hydrocarbon nanofluids with hyperbranched polymer as stabilizer and initiator

16 Influence of Temperature on the Longitudinal Cracking in Multipurpose Precast Concrete Sleepers Prior to Their Installation.

17 A microstructural model for homogenisation and cracking of piezoelectric polycrystals

18 Catalytic performance of scrap tyre char for the upgrading of eucalyptus pyrolysis derived bio-oil via cracking and deoxygenation

19 Revised Macro-cracking Criterion for Massive Non-reinforced Self-compacting Concrete Structures Under Thermal Load Based on Extensive Experimental Testing and Field Observations

20 Effects of Rubber Size on the Cracking Resistance of Rubberized Mortars.

21 The role of service-induced residual stresses in initiating and propagating stress corrosion cracking (SCC) in a 316 stainless steel pressure-relief-valve nozzle set

22 A comprehensive investigation on the effect of flood and MQL coolant on the machinability and stress corrosion cracking of super duplex stainless steel

23 Steam cracking of green diesel (C12) to BTX and olefins over silane-treated hierarchical BEA

24 Bio-remediation of desiccation cracking in clayey soils through microbially induced calcite precipitation (MICP)

25 Desiccation cracking behavior of MICP-treated bentonite

26 Thermal Cracking Analysis of Microbial Cemented Sand under Various Strains Based on the DEM

27 Relationship Between Matrix Cracking and Delamination in CFRP Cross-Ply Laminates Subjected to Low Velocity Impact.

28 Numerical Simulation on the Origin of Solidification Cracking in Laser Welded Thick-Walled Structures

29 Laboratory Investigation on the Shrinkage Cracking of Waste Fiber-Reinforced Recycled Aggregate Concrete.

30 Influence of Selected Warm Mix Asphalt Additives on Cracking Susceptibility of Asphalt Mixtures.

31 Microstructure and stress corrosion cracking of a SA508-309L/308L-316L dissimilar metal weld joint in primary pressurized water reactor environment

32 Liquid Metal Embrittlement Cracking During Resistance Spot Welding of Galvanized Q&P980 Steel

33 Critical design parameters of the electrode for liquid metal embrittlement cracking in resistance spot welding

34 Prestress Loss Diagnostics in Pretensioned Concrete Structures with Corrosive Cracking

35 Application of catalyst gradation technology in 3 million t/a diesel hydrocracking unit for increasing yield of chemical feedstocks

36 A Study on Microstructure, Residual Stresses and Stress Corrosion Cracking of Repair Welding on 304 Stainless Steel: Part II-Effects of Reinforcement Height.

37 A Study on Microstructure, Residual Stresses and Stress Corrosion Cracking of Repair Welding on 304 Stainless Steel: Part I-Effects of Heat Input.

38 One-Step Laser Encapsulation of Nano-Cracking Strain Sensors

39 Probabilistic concept for the validation of the effectiveness of countermeasures against early-age cracking in massive concrete structures

40 renewable gasoline produced by co-cracking of methanol and ketones in bio-oil

41 influence of scandium addition on stress corrosion cracking susceptibility of al-zn-mg alloy in different corrosive environments

42 cracking behavior of a concrete arch dam with weak upper abutment

43 toward the multiscale nature of stress corrosion cracking

44 experimental study on the shrinkage properties and cracking potential of high strength concrete containing industrial by-products for nuclear power plant concrete

45 necrotrophic fungi associated with epidermal microcracking caused by chilling injury in pickling cucumber fruit fungos necrotróficos associados à microfissura epidérmica causada pelo frio em pepinos em conserva

46 effect of the microstructure and distribution of the second phase on the stress corrosion cracking of biomedical mg-zn-zr-xsr alloys

47 assessment of early-age cracking of high-performance concrete in restrained ring specimens

48 the influence of testing methodology and changes of microstructural parameters on resistance of duplex steel to sulphide stress cracking

49 simulación numérica del proceso de fractura en modo i de vigas de concreto con trayectoria de fisuración conocida mediante un modelo discreto de fisura cohesiva numerical modeling of the fracture process in mode i of concrete beams with known cracking path by means of a discrete model of cohesive crack

50 the effect of applied stress on environment-induced cracking of aluminum alloy 5052-h3 in 0.5 m nacl solution

51 hydrotalcite catalyst for hydrocracking calophyllum inophyllum oil to biofuel: a comparative study with and without nickel impregnation

52 effects of cracking test conditions on estimation uncertainty for weibull parameters considering time-dependent censoring interval

53 environmental and material influences on the stress-corrosion cracking of steel in h2o–co–co2 solutions

54 the influence of fibre orientation on the post-cracking tensile behaviour of steel fibre reinforced self-compacting concrete

55 comparison of kinetic-based and artificial neural network modeling methods for a pilot scale vacuum gas oil hydrocracking reactor

56 thermal cracking analysis during pipe cooling of mass concrete using particle flow code

57 effect of high cl<sup>-</sup> environment on stress corrosion cracking behavior of m152 and 17-4ph high-strength steels

58 removal and conversion of tar in syngas from woody biomass gasification for power utilization using catalytic hydrocracking

59 evaluate the impact of cold wave on face slab cracking using fuzzy finite element method

60 stress corrosion cracking behaviour of gas tungsten arc welded super austenitic stainless steel joints

61 plastic zone evolution near a crack tip and its role in environmentally assisted cracking

62 kinetic study on catalytic cracking of rubber seed (hevea brasiliensis) oil to liquid fuels

63 the irradiation-assisted stress corrosion cracking (iascc) issue: some examples of studies carried out at cea

64 tig dressing effects on weld pores and pore cracking of titanium weldments

65 cracking behavior of tungsten armor under elm-like thermal shock loads: a computational study

66 the evolution of cast microstructures on the haz liquation cracking of mar-m004 weld

67 Influence of ultrafine fly ash on the early age response and the shrinkage cracking potential of conrete

68 Laboratory Validation of Surface-Initiated Transverse Cracking of Asphalt Pavement

69 Detection and Quantification of Cracking in Concrete Aggregate through Virtual Data Fusion of X-Ray Computed Tomography Images

Keyword Connections

Journals

Research Groups

Bibliographies