18 Erratum: “A novel method for characterizing temperature-dependent elastic modulus and glass transition temperature by processing the images of bending cantilever slender beams at different temperatures” [AIP Advances (2018) 8 (115201) DOI: 10.1063/1.5058689]

19 A simulation-based method to detect mechanical parameters of I-beams and hollow cylinders

20 Debonding Detection and Monitoring for CFRP Reinforced Concrete Beams Using Pizeoceramic Sensors.

21 Crack based bond strength model of externally bonded steel plate and CFRP laminate to predict debonding failure of shear strengthened RC beams

22 Fire Performance of CFRP Strengthened Steel I Beams Cured at Elevated Temperature

23 Size Effect in RC T-Beams Strengthened in Shear with Externally Bonded CFRP Sheets: Experimental Study

24 Pine Beams Retrofitted with FRP and Poplar Planks: Mechanical Behavior.

25 Fatigue behavior of concrete beams reinforced with glass- and carbon-fiber reinforced polymer (GFRP/CFRP) bars after exposure to elevated temperatures

26 A Review on Strengthening Steel Beams Using FRP under Fatigue

27 Full-field imaging of thermal and acoustic dynamics in an individual nanostructure using tabletop high harmonic beams.

28 Experimental and numerical analysis of large-scale bamboo-reinforced concrete beams containing crushed sand

29 Comparison of penh, fluka, and Geant4/topas for absorbed dose calculations in air cavities representing ionization chambers in high-energy photon and proton beams.

30 Dose enhancement in gold nanoparticle-aided radiotherapy for the therapeutic photon beams using Monte Carlo technique

31 Report of a National Cancer Institute special panel: Characterization of the physical parameters of particle beams for biological research.

32 Effects of the reinforcement ratio and chloride corrosion on the fatigue behavior of RC beams

33 Spin Physics Experiments at NICA-SPD with polarized proton and deuteron beams

34 Influence of top-casting-induced defects on the corrosion of the compressive reinforcement of naturally corroded beams under sustained loading

35 Distributed Bragg deflector coupler for on-chip shaping of optical beams.

36 Study on the Flexural Performance of Hybrid-Reinforced Concrete Beams with a New Cathodic Protection System Subjected to Corrosion.

37 Deformation Analysis of Reinforced Beams Made of Lightweight Aggregate Concrete.

38 Evaluating reduced order models of curved beams for random response prediction using static equilibrium paths

39 Experimental Investigation on Flexural Behavior of Reinforced Ultra High Performance Concrete Low-Profile T-Beams

40 Flexural behavior of bamboo–concrete composite beams with perforated steel plate connections

41 Structural performance of concrete beams with micro-reinforcement strengthened with GFRP laminates under monotonic loading

42 Calibration of the radiation monitors from DESY and SPring-8 at the quasi-mono-energetic neutron beams using 100 and 300 MeV <sup>7</sup>Li(p,n) reaction at RCNP in Osaka Japan in November 2014

43 The ultimate bearing capacity of ice beams

44 Research of the Fatigue Life of Welded Joints of High Strength Steel S960 QL Created Using Laser and Electron Beams.

45 Parametric Investigation of Particle Swarm Optimization to Improve the Performance of the Adaptive Neuro-Fuzzy Inference System in Determining the Buckling Capacity of Circular Opening Steel Beams

46 Writing 3D Nanomagnets Using Focused Electron Beams

47 Writing 3D Nanomagnets Using Focused Electron Beams

48 Computational Hybrid Machine Learning Based Prediction of Shear Capacity for Steel Fiber Reinforced Concrete Beams

49 Energy analysis in positive SIMS with Cs+ beams

50 variation of shrinkage strain within the depth of concrete beams

51 investigation of subcombination internal resonances in cantilever beams

52 passivity analysis of nonlinear euler-bernoulli beams

53 strengthening beams by means of cfk strips

54 taranis xgre and idee detection capability of terrestrial gamma-ray flashes and associated electron beams

55 vibration analysis of rotating tapered timoshenko beams by a new finite element model

56 inclusion of cfrp-epoxy composite for end anchorage in nsm-epoxy strengthened beams

57 optimization of natural frequencies and sound power of beams using functionally graded material

58 recent developments of reflectarray antennas for reconfigurable beams using surface-mounted rf-mems

59 rc t beams strengthened to shear with carbon fiber composites

60 use of fragmentation beams at lns with chimera detector

61 dimensionless analytical solution and new design formula for lateral-torsional buckling of i-beams under linear distributed moment via linear stability theory

62 pretreatment of woven jute frp composite and its use in strengthening of reinforced concrete beams in flexure

63 features of the masonry structure calculation with vertical ring beams based on the european standards

64 unified formulation applied to free vibrations finite element analysis of beams with arbitrary section

65 damping behavior of synthetic graphite beams

66 proposal of a viscous model for nonviscously damped beams based on fractional derivatives

67 surface dose measurements and comparison of unflattened and flattened photon beams

68 licorne: a new and unique facility for producing intense, kinematically focused neutron beams at the ipn orsay

69 status of positron beams for dark photons experiments

70 on the energy gain enhancement of dt+d3he fuel configuration in nuclear fusion reactor driven by heavy ion beams

71 on the performance of linear and nonlinear dynamic absorbers for beams subjected to moving loads

72 computer-aided design of elliptically focused bootlace lens for multiple beams

73 strengthening of rc slabs with symmetric openings using gfrp composite beams

74 shear strength of reinforced concrete circular cross-section beams

75 numerical analysis of steel-fiber-reinforced concrete beams using damage mechanics

76 comparison of different local unrefined beam theories for bending and nano beams buckling analysis

77 simulación numérica del proceso de fractura en modo i de vigas de concreto con trayectoria de fisuración conocida mediante un modelo discreto de fisura cohesiva numerical modeling of the fracture process in mode i of concrete beams with known cracking path by means of a discrete model of cohesive crack

78 nonlinear primary resonance of micro/nano-beams made of nanoporous biomaterials incorporating nonlocality and strain gradient size dependency

79 extension of busch’s theorem to particle beams

80 emittance characterization of ion beams provided by laser plasma

81 estimating the behavior of rc beams strengthened with nsm system using artificial neural networks

82 performance based analysis of hidden beams in reinforced concrete structures

83 shape optimization and sensitivity of compliant beams for prescribed load-displacement response

84 vibration of timoshenko beams using non-classical elasticity theories

85 structural behavior of reinforced self-compacted engineered cementitious composite beams

86 efficacy of thermally conditioned sisal frp composite on the shear characteristics of reinforced concrete beams

87 dosimetric characteristics of a two-dimensional diode array detector irradiated with passively scattered proton beams

88 nonlinear vibrations of 3d laminated composite beams

89 selection of the elastic scattering events in interactions of the nica colliding proton (deuteron) beams

90 fatigue crack propagation behavior of rc beams strengthened with cfrp under high temperature and high humidity environment

91 long-term flexural behaviors of gfrp reinforced concrete beams exposed to accelerated aging exposure conditions

92 attraction between trapped ions and beams of electrons

93 relating field-aligned beams to inverted-v structures and visible auroras

94 shear capacity and failure behavior of steel-reinforced high ductile concrete beams

95 a dynamic stiffness element for free vibration analysis of delaminated layered beams

96 examination and testing of crane beams of an overflow dam

97 analysis of bending waves in phononic crystal beams with defects

98 finite element vibration analysis of beams, plates and shells

99 resistance of i-beams in warping torsion with account for the development of plasticdeformations

100 exploration of fracture dynamics properties and predicting fracture toughness of individual wood beams using neural networks

101 strength and ductility of reinforced concrete t-beams strengthened in the negative moment region with wire rope and mortar composite

Keyword Connections

Journals

Research Groups

Bibliographies